Takex

Takex

No image available.
Distributes alarm and surveillance equipment.
  • 230 East Caribbean Drive
  • Sunnyvale, CA 94089
  • Phone: (408) 747-0100
  • Toll Free: (877) 371-2727
  • Fax:
  • Website: http://www.takex.com

Want to know more about Takex Get Info Now

Expand for more details on this Company

Takex OMS-12FE Outdoor PIR Intrusion Detector

Product From Takex

Santa Clara, CA November 1, 2012: TAKEX, the quality leader in security sensors, announced today the introduction of the OMS-12FE, a new slim profile outdoor PIR (passive infrared) intrusion detector with dual-zone detection capability.

Get Info Now

Perimeter Security Sensor from Takex

Product From Takex

Eliminate nuisance alarms with the COM-IN-100A dual technology perimeter security sensor from Takex. Combining a point-to-point microwave sensor with the performance of a double-modulated quad beam, the sensor ensures that detection occurs regardless of fog, rain, snow and other interference, thus virtually eliminating nuisance alarms.

Get Info Now

Intelligent Quad beams

Product From Takex

TAKEX Intelligent Quad beams are the beams all others are measured by. The Intelligent series is the flagship of the TAKEX range of infrared photoelectric beams. Intelligent series beams are synchronized to maintain range and stability in severe weather, while rejecting “nuisance-alarms” caused by birds, animals or blown litter. With 16 beam paths between the transmitter and receiver, TAKEX beams ensure maximum stability in perimeter protection, covering external distances up to 200m. Available in stand-alone models (PB-IN-HF series) or the NEW TAKEX PB-HF-KH models, which are designed specifically for use in our NEW TA Tower series. Supplied with “quick fix” mounting brackets for fast, trouble-free installation, the beam units locate in vertical slide-channels in the TA tower spine for easy and precise height adjustment. Optional heaters are available.

Get Info Now

FS-2000 Flame Sensor

Product From Takex

The FS-2000 flame sensor from Takex is a UL-rated UV Flame detector for schools, server rooms or other critical environments where early detection of flame presence is essential to an effective response. The device is easy to install, with separate tamper output, and has multiple user-defined settings. The FS-2000 has a broad, 33-foot area of coverage for commercial applications. The sensors are designed to detect ultraviolet rays in flames. They either activate a built-in alarm sounder or are connected to a remote panel annunciating device. The internal alarm sounder output is greater than 80dB at 3.3ft. (1m) in front of the sensor, and it can be turned off. The unit is also equipped with Tamper output.

Get Info Now

COM-IN100A

Product From Takex

An outdoor combination microwave/passive infrared sensor, the COM-IN100A from Takex has a detection range of 330 feet, with Auto Gain Control, and/or selectable detection switch and high/low frequency microwave setting for stacking capability. Put it anywhere in severe weather conditions and watch it perform.

Get Info Now