Tane Alarm Products

Tane Alarm Products

No image available.
magnetic contacts : recessed & SMT with best guarantee. FOB NY or Shanghai (see cat. for complete)
  • Magnetic Contacts Facility
  • New Hyde Park, NY 11040
  • Phone: (516) 328-3351
  • Toll Free: (800) 852-5050
  • Fax:
  • Website: http://www.tanealarm.com

Want to know more about Tane Alarm Products Get Info Now

Expand for more details on this Company

Tane TV-330 TV test monitor

Product From Tane Alarm Products

The Tane TV-330 is a portable and convenient TV test monitor. It can test camera video, and controls RS422 and 485 pan tilt and zooms with its 20 built-in protocols. It has a built-in color generator and volt-ohm meter and can test category 5 and 6 cables for pin configuration. It also has a 12V DC output to power up cameras during set up. The easy-to-use on-screen displays identify problems quickly and efficiently. This CCTV TESTER is a dependable tool for ensuring trouble-free installations. Dimensions are 2” depth by 3.5” wide by 6.3” length with a easy-to-see 2.5” screen. Advantages include a shade flap to see outdoors as well as a lanyard built in to keep it from dropping.

Get Info Now

PILL Contacts

Product From Tane Alarm Products

Tane Alarm’s “PILL” Contacts alleviate headaches caused by tight fitting window applications. The TANE-PILL comes in side or center leads as well as terminal connects. Its size is a sleek, low-profile width of .20” x .39” wide x 1.10” long. It not only looks good on the surface of a window but works best buried in a window sill where you cannot drill due to window warranty issues. Now you have a contact that looks good on the surface or can be hidden in windows. Leaded versions include 18” 22AWG standard (with longer wires available). Gap is 3/4”. Extra vent magnets are available. TANE’s Pill group comes with its signature $50 lifetime warranty on service calls. Free samples are available by emailing info@tanealarm.com, or by calling 800-852-5050. See www.tanealarm.com.

Get Info Now

TANE-96 fast track mount contact

Product From Tane Alarm Products

Tane Alarm’s fast track mount contact, the TANE-96 is bi-directional meaning the cable coming from the contact can be mounted from the left or right by repositioning the switch on its assembly with 2 screws. Installation on this commercial grade Tane contact takes under 2 minutes by simply sliding the track open and then pushing it in place and tightening one simple bolt. Gap on the contact is 2 ½“ featuring a minimum dead zone due to the use of 2 long life reed switches in the place of the contact side. High quality is ensured with a $50 lifetime warranty if a service call is required. For more information go to www.tanealarm.com, info@tanealarm.com or call 516 328 3351.

Get Info Now

Tane 86 overhead garage door contact

Product From Tane Alarm Products

The Tane 86 overhead garage door contact is a floor mount mini in size. Dimensions are 2 ¼” long by beveled 3/8” high. This allows the installer to mount the contact out of the way in warehouse applications. The overall gap is almost 3 inches with a leeway for the magnet to go 2 inches off center if the door moves in or out as a result of a storm. The contact is bar cast aluminum with no epoxy on the underside to deteriorate over time. The magnet housing is angled to not allow it to be used as a step for closing the door. The TANE-86 comes with commercial grade flexible armored cable. This design allows a unique use for normal doors in commercial applications by mounting the contact on the door frame and magnet on the door, thus making it hard for vandals to abuse. Tane offers a $50 lifetime warranty. For more information go to www.tanealarm.com or call 800 852-5050.

Get Info Now

Tane TV-330

Product From Tane Alarm Products

The Tane TV-330 is a portable and convenient TV test monitor. It can test camera video, and controls RS422 and 485 pan tilt and zooms with its 20 built-in protocols. It has a built-in color generator and volt-ohm meter and can test category 5 and 6 cables for pin configuration. It also has a 12V DC output to power up cameras during set up. The easy-to-use on-screen displays identify problems quickly and efficiently.

Get Info Now