NVT Introduces Power Supply Cable Integrator Hub

Menlo Park, CA - Network Video Technologies (NVT), has just released a revolutionary Power Supply Cable Integrator Hub. The NV-16PS10-PVD provides camera power while delivering video and P/T/Z telemetry all over a single 4-pair Cat5 cable. Up to 16 cameras are supported in a 1U rack-, wall-, or deskmount unit.

The NV-16PS10-PVD is a key hybrid component that consolidates all CCTV system cabling using standard EIA/TIA 568B structured building wiring. Designed for installation in the IDF/Telecom Closet or MDF/Equipment Room, the NV-16PS10-PVD has independently selectable 24VAC-OFF-28VAC outputs that can support at-distance camera loads up to 1 Amp per channel (10 Amp aggregate). Per-channel diagnostic LEDs display load/no-load, mis-wires, or fault conditions at a glance. Automatic-reset fault protection, transient protection, and ground-loop-free individually floating outputs provide the most trouble-free solution in the business.

The NV-16PS10-PVD is the newest member of NVT's PVD family that includes single camera-end devices such as the NV-216A-PV and the NV-218A-PVD, and control room 16-port receivers such as the NV-1613J or NV-1662J. The PVD family allows installers and end users to benefit from the performance, cost savings, simplicity, and future-proofing of structured building wiring. All NVT products are UL and cUL listed, and compliant with CE, RoHs, and WEEE, and come with NVT's lifetime warranty.

For further information, visit www.nvt.com.