C100-Series Dual Technology Microwave/PIR Sensors

C100-Series Dual Technology Microwave/PIR Sensors

C100-Series Dual Technology Microwave/PIR Sensors Product Image

Napco's C100-Series Dual Technology Microwave/PIR Sensors use patented adaptive dual technology to dramatically reduce false alarms by employing proprietary adjustment algorithms. C100-Series Models' adaptive technology automatically adjusts 24-hours a day to counteract false alarms. They detect movement strong enough to generate a signal, but insufficient in strength to indicate a valid alarm. The detectors automatically change sensitivity modes, effectively widening the gap between the detected signal and its alarm threshold. Disturbances registered by the PIR and/or microwave sensor are better tolerated and false alarms are dramatically reduced.

Expand for more details on this Product

GN-503FF smoke and carbon monoxide detector

Product From Gentex Corporation

Gentex Corporation (ISC-West 2013 Booth # 10079) has released a combination photoelectric smoke and carbon monoxide (CO) alarm with two (2) sets of Form A/Form C relay contacts activating independently for smoke and CO events. The GN-503FF utilizes photoelectric and electrochemical sensing technology performance wherever smoke and CO detection is required. The GN-503FF is a 120VAC hard wired alarm with 9VDC battery back-up, includes tandem interconnect capabilities, differentiating signals for each alarm type annunciation, quick disconnect wire harness, low or missing battery indicator, and push button self and functionality test.

Get Info Now

FiberSensys Stereo Doppler Microwave

Product From Fiber Sensys, Inc.

For accurate and effective volumetric intrusion detection, Fiber SenSys offers the rugged, outdoor MD5 series microwave sensor. The MD5 series employs leading-edge digital or analog microwave technology, combined with digital signal processing, providing enhanced reliability through the analysis of the microwave signals transmitted and received. The internal microprocessor employs "fuzzy" logic technology to create behavior models based on received signals and compares with those generated by an intruder.

Get Info Now

American Science and Engineering's Z Portal

Product From American Science & Engineering

BILLERICA, Mass. – June 14, 2012 – American Science and Engineering, Inc. (“AS&E”), a leading worldwide supplier of innovative X-ray detection solutions, announced today the receipt of a follow-on order for a Z Portal cargo and vehicle screening system. The Z Portal system will be used by law enforcement officials to scan vehicles and trucks entering a critical infrastructure facility for explosive threats and contraband.

Get Info Now

iSeries VX-402Ri

Product From Optex Inc. Security Products

Optex has partnered with Inovonics to provide a ready to install wireless solution for stable outdoor detection. The new iSeries VX-402Ri is a 40’ x 40’ outdoor PIR detector that comes with an Inovonics EchoStream EN1941 transmitter and battery already installed in the sensor. The detector is a perfect way to lower labor costs and installation time while protecting storage yards, rooftops, construction sites and anywhere else extremely reliable outdoor detection is required. www.optexamerica.com

Get Info Now

LuNAR Ceiling-Mount Intrusion Detector

Product From RISCO Group USA

RISCO Group USA's Industrial LuNAR addressable dual-technology ceiling-mount intrusion detector combines detection accuracy with false alarm immunity. The detector can be installed up to 28 feet high and has Anti-Cloak Technology (ACT) to detect intruder camouflage attempts. The detector incorporates three independently adjustable photo infrared (PIR) channels for customized coverage, along with a microwave channel. Intelligent digital signal processing adjusts alarm threshold and pulse count verification to accommodate actual intruder behavior and environmental factors. The detector is suitable for warehouses with high ceilings as well as mall applications, and can operate in higher temperatures common in warehouse settings. The coverage area is 360 degrees, emanating in a cone-shaped pattern from the detector mounted in a ceiling to a 60-foot diameter.

Get Info Now

Inovonics’ wireless panic buttons

Product From Inovonics Wireless Corporation

Inovonics’ wireless panic buttons provide a simple, discreet way to signal for help and can reduce response times when it matters most. The Inovonics wireless add-on receivers, signal repeaters, and mobile duress pendants are easily installed into any commercial security system, increasing safety by lowering response times and increasing the overall effectiveness of security staff, all while adding to the investment value of existing systems.

Get Info Now

PA-6800 Series Ceiling Mount PIR Sensors

Product From Takex

The PA-6800 series of ceiling mount PIR sensors from TAKEX combine a discreet compact appearance with outstanding performance at a low price. The sensor can be snapped in and out of the detachable base unit for easy installation in high places.

Get Info Now

PB-IN-HF Series Intelligent Quad Photoelectric Beams

Product From Takex

The TAKEX PB-IN-HF series Intelligent Quad Photoelectric Beams are industry leading performers available in ranges from 165 Feet/50 Meters, 330 Feet/100Meters & 660 Feet/200 Meters. Each features high performance Double-Modulated infrared light sources, a Resonance Filter to remove unwanted background noise, TAKEX Beams have 50,000 Lux of external light immunity, Phase Locked Loop monitors performance in changing environmental conditions, Auto-Gain Lock allows high tolerance of signal degradation before issuing an alarm, Auto-Gain Control allows the photo beam receiver to increase its sensitivity up to 300% to maintain protection integrity, Environmental Alarm Output can signal when 80% of infrared signal is lost providing pre-warning due to fog or other environmental disturbances, 4-Channel Frequency Selection allows the stacking of beams as well as the installation of beams within close proximity of one another without worrying about crosstalk interference.

Get Info Now

FP1400 Zone-based Perimeter Intrusion Detection System (PIDS)

Product From Optellios, Inc

Newtown, PA – [February 21, 2014] – Optellios, Inc., an American owned, U.S. based developer and leading manufacturer of advanced fiber-optic sensing and security systems, is pleased to announce the release of the FP1400 to the highly acclaimed FiberPatrol family of Optellios products.

Get Info Now

FD525-HALO Perimeter Intrusion Detection System

Product From Fiber Sensys, Inc.

Fiber SenSys is pleased to announce the release of the FD525-HALO™ Perimeter Intrusion Detection System. This easy to use and install, cost-effective perimeter security solution economically addresses sites larger than 500 meters. Each

Get Info Now