Innovative Electronic Design's G7053 Series

Innovative Electronic Design's G7053 Series

No image available.

For over 30 years Innovative Electronic Designs has set the standard for large-scale audio and visual paging systems. IED is proud to announce the release of the G7053 Series audio power amplifier system. The G7000 series is a modular amplifier frame that allows for unmatched flexibility, features, and ease of use.

The G7053 mainframe is the base for the G7000 series. This unit can support up to five (5) dual channel 200 watt RMS per channel, 70.7V amplifier cards allowing for delivery of up to 1600 watts of continuous output. These amplifier cards utilize the industry's first 70.7V class D topology using direct Pulse Wave Modulation from onboard DSP to the output, making this amplifier truly "digital". Any installed amplifier card(s) can be configured to act as a back up unit for any combination of cards installed in the mainframe, which is an industry first. Each amplifier card features onboard DSP allowing for up to 200ms delay, 9 band parametric EQ, output limiting, and automatic ambient noise compensation.

The G7053also supports a single CobraNet® enabled CPU control processor card. This card offers dual redundant Ethernet ports for CobraNet® and control. This CPU card includes four balanced line level analog inputs and two balanced line level analog outputs allowing for paging, messaging, and BGM control and delivery. Onboard DSP can be applied to paging and zone control, including program, BGM, and page zone routing. When used in this configuration utilizing the amplifier card modules and CPU, the G7000 series is designed to meet UL Standard 1711.

If necessary, the G7053 can also support up to three (3) auxiliary I/O cards, the G7000AUX. This auxiliary card includes eight noise sensor collector inputs, four relay outputs and four logic I/O ports for even greater system customization. Finally the G7000 series includes IED's industry leading supervision and fault reporting capabilities. The unit will monitor fan status, temperature, and output current and voltage as well as ground fault detection. The fully integrated monitoring system has the capability of monitoring amplifiers and speaker lines using user defined frequencies, levels and schedules

Expand for more details on this Product

AC Video System Power Supply Line

Product From Honeywell Power Products

Northford, Conn., June 24, 2014 – Honeywell (NYSE: HON) Power today released a new line of cost-effective, UL listed AC Video system supplies that provide 24VAC of constant power to support systems of any size. Equipped with as many as 16 output circuits and made to overcome common voltage drop issues, the new AC Video Power Supplies are ideal for systems with longer wire runs and more cameras.

Get Info Now

EnTerra Series 3-phase Battery Backup Systems

Product From Para Systems, Inc. / Minuteman UPS

Dallas, TX – June 25, 2014 – Para Systems Inc. today announced the latest addition to its line of power protection products, the all-new EnTerra Series of 3-phase UPSs. Designed to protect equipment in the IT/networking, industrial, medical, and enterprise security sectors from all types of power problems, the EnTerra series is available for 50 or 60Hz applications ranging from 10kVA to 40kVA. Parallel options up to 160kVA are also available. The line provides a host of standard features including on-site startup, SNMP communications card, and a full 2-year warranty, along with up to 94% system efficiency and simplified sales and ordering processes.

Get Info Now

NAC Expander Power Supplies

Product From LifeSafety Power

LifeSafety Power's four-zone Notification Appliance Circuit (NAC) Expander Power Supplies are designed to extend the power capabilities of existing NACs and provide power for auxiliary devices. The units can connect to any 12 or 24V Fire Alarm Control Panel (FACP) or operate as a standalone system. The unit is configured in a red painted, steel, locking enclosure with tamper switch and integral battery space.All products are identical in provided features, except for the power level which is offered in three increasing increments of 6, 8, or 10 Amp capability.

Get Info Now

Altronix’s NetWay 1D and NetWay 1DWP Midspans with Hi-PoE

Product From Altronix Corporation

Las Vegas, NV (April 2, 2014) – Altronix, the leading manufacturer of low voltage power supplies and transmission solutions for the electronic security industry, continues to expand its NetWay™ product line with NetWay1D and NetWay1DWP here at ISC West 2014. These single port midspan injectors provide Hi-PoE up to 60W in addition to being PoE/PoE+ compliant.  

Get Info Now

SentryPOWER POD – Power-On-Demand

Product From Sentry View Systems

Las Vegas, April 2, 2014:  Sentry View Systems, Inc. Sentry View Systems announces the launch of SentryPOWER™ POD – Power-On-Demand for your remote systems. SentryPOWER™ POD is a fully integrated, self-contained unit in a 5U configuration providing hybrid power input from up to 3 sources (e.g. 110vac, solar panel and a wind turbine), web interface for setup and maintenance, power I/O and battery state monitoring and logging, programmable power relays, contact closure inputs, and built-in network switch for connecting itself and your remote devices to a network.

Get Info Now

EDS-P510A-8 PoE+ Ethernet Switch

Product From Moxa

BREA, CA, FEBRUARY 14, 2014 - Moxa, a leader in intelligent industrial networking solutions, is leveraging its extensive technological resources to introduce one of the world's first PoE+ Ethernet switches engineered to perform in harsh outdoor and industrial manufacturing environments, featuring 3KV LAN surge protection and a wide temperature range (-40°C to +75°C) that ensures the highest reliability of PoE systems while delivering network speeds of up to 1000 Mbps to eliminate bottlenecks.

Get Info Now

Honeywell Power's HP1205UL and HP1210UL Power Supplies

Product From Honeywell Power Products

NORTHFORD, Conn., Mar. 13, 2014 - Honeywell Power today announced a new series of power supplies that deliver more DC power to CCTV cameras and other peripheral devices. The new line includes unique features to speed installation and service calls, as well as increase survivability of system operations when a facility’s AC power is lost.

Get Info Now

Comtrol's RocketLinx ES7206-XT PoE Switch

Product From Comtrol Corporation

MINNEAPOLIS, Minnesota — February 4, 2014 — Comtrol Corporation, a leading manufacturer of industrial device connectivity products, announced the release of the RocketLinx ES7206-XT Power over Ethernet switch. Comtrol’s unmanaged ES7206-XT contains four Gigabit IEEE 802.3af/at PoE ports, one Gigabit copper uplink port, and one Gigabit SFP uplink port supporting multi-mode or single-mode fiber connections. Featuring Voltage Boost technology, the ES7206-XT enables direct 12-36 VDC input supporting vehicle, building, and factory power systems while delivering reliable power to PoE devices.

Get Info Now

Altona's AT-PS-POCC Mid-Span Power Supply

Product From Altona

SAN JOSE, Calif. — Jan. 7, 2014 — Atlona, a leading AV distribution solutions provider, today announced that the company is now shipping its new AT-PS-POCC mid-span power supply. Designed to power PoCc-compatible HDBaseT transmitters and/or receivers without requiring the related Atlona power source device, the AT-PS-POCC can send power to a compatible transmitter, receiver, or both using the same category cable as the HDBaseT signal. 

Get Info Now

Eaton's 93E Uninterruptible Power System

Product From Eaton Corporation

December 4, 2013 … Eaton today announced the launch of its 93E uninterruptible power system (UPS), featuring enhanced maintenance bypass options and external battery cabinets to ensure uptime of critical IT systems. Known as the 9E in previous models, Eaton’s new 93E is engineered for maximum reliability. Delivering up to 98 percent efficiency while maintaining a small physical footprint, the 93E provides information technology (IT) and data center managers with the flexibility to meet growing compute, storage and networking needs while simultaneously reducing capital and operational costs.  

Get Info Now