SafetyCare's EMTWatch FallDetect

SafetyCare's EMTWatch FallDetect

SafetyCare's EMTWatch FallDetect Product Image

Reading, PA— SafetyCare Technologies announces the upcoming release of the Industries’ most accurate fall detector.

The new EMTWatch FallDetect will transmit an alarm to SafetyCare’s Response Center (SRC), staffed by Emergency Medical Technicians (EMTs), when a fall occurs. The innovative and proprietary technology uses more than 20 algorithms with data collected from three sensors housed inside the waterproof unit to provide the most accurate fall detection. The proprietary design will significantly minimize the issues of false alarms that are common with similar devices available today. The EMTWatch FallDetect has the ability to identify a “slow fall” such as when someone is attempting to brace themselves as they slowly fall to the ground or out of a chair as well as “fast falls.” In line with SafetyCare’s model of providing products that promote independence and dignity with style, the EMTWatch FallDetect has been fashionably designed as a teardrop shaped pendent which is discreet and stylish.

The EMTWatch FallDetect is a device that works together with SafetyCare’s EMTWatch, a Personal Emergency Response System (PERS), which was made available through the company’s authorized dealer network earlier this year.

The SafetyCare EMTWatch FallDetect is the culmination of more than two years of a research and development. It is anticipated this device will answer the growing demand for accurate fall detection for the Aging-in-Place market.

How It Works: Once the EMTWatch FallDetect identifies a possible fall has occurred it goes into a determination phase, at which time the device analyzes the measurements taken before, during, and immediately after the possible fall. If a fall is determined to have occurred, the EMTWatch FallDetect will begin to vibrate notifying the wearer that a fall has been detected, and an alarm is about to be sent to the EMTWatch Base Unit. During the notification stage the individual wearing the device can deactivate the alarm by pressing its manual alarm button for three seconds.  If the wearer does not do this, an alarm is sent to the EMTWatch Base Unit, which dials out to the SafetyCare’s Response Center (SRC). EMTs staffing the SRC will then attempt to communicate with the wearer to triage the emergency event. If no communication can be made, Emergency Medical Services will be dispatched to provide help.

To learn more about SafetyCare’s EMTWatch FallDetect and other products, please visit www.safetycare.net.

 

 

 

Expand for more details on this Product

STI's Wireless Battery Driveway Monitor

Product From Safety Technology International Inc. (STI)

The Wireless Battery Driveway Monitor with Single Channel Slave Receiver is designed to work in conjunction with a control panel.

Sensor detects vehicle entering/leaving driveway and transmits a wireless signal to the receiver. The patented magnetometer detects movement of large metallic objects. People, animals and shadows will not activate sensor.

Get Info Now

Keypads for NetworX systems

Product From Interlogix

LINCOLNTON, N.C., Sept. 29, 2014 — Interlogix, a leader in security and life safety solutions for residential and commercial enterprises, today announced three new keypads that offer powerful protection and user-friendly features for its popular

Get Info Now

NAPCO Control4

Product From Napco Security Systems Inc

Denver, CO – September 11, 2013 – CEDIA Expo 2014 -- Napco Gemini Security System kiosk in the Control4 Booth #430 -- Napco Security Technologies, Inc., a well-known security system manufacturer, and Control4 Corporation, a leader in residential automation systems, are pleased to announce that Napco Security System software has recently been Control4-certified. The new integration with the Control4 platform enables Control4 Dealers to quickly and easily integrate security within their projects and offer state of the art protection of homes and businesses.

Get Info Now

Honeywell's IS3000 and DT8000 Series Motion Detectors

Product From Honeywell International Inc.

MELVILLE, N.Y. August 18, 2014 – Honeywell (NYSE: HON) today introduced the IS3000 and DT8000 Series of hardwired sensors—a portfolio of seven high-performance indoor motion detectors that satisfy the demands of virtually any installation, from the most basic residential to the most complex commercial application. Offering superior performance combined with Honeywell’s exclusive Snap & Set installation technology, the IS3000 and DT8000 Series provide outstanding premises protection while saving dealers time and money through faster, easier installs. It integrates fully with Honeywell Total Connect™ Remote Services when used with VISTA® control panels, providing dealers with an excellent opportunity to earn additional recurring monthly revenue (RMR).

Get Info Now

Remote Polling Module II (RPM II) SDK

Product From Southwest Microwave Inc

Tempe, Arizona - Southwest Microwave has expanded Software Development Kit (SDK) options for its INTREPID™ Series II perimeter intrusion detection systems (PIDS) with the addition of the Remote Polling Module II (RPM II)

Get Info Now

Z20 Disturbance Sensor

Product From Gallagher

The Z20 Disturbance Sensor from Gallagher heightens perimeter security through intelligent detection of vibration or movement of the fence structure. Alarms are generated when disturbance meets predefined criteria.

Get Info Now

Lone Worker Emergency Call Transmitter

Product From Elpas

Tyco Security Products’ Lone Worker Emergency Call Transmitter from Elpas ensures that people who may be subject to attack or injury while on the job can send alerts about their situation so that responders can be dispatched to the exact location of the evolving security incident.

Get Info Now

Vindicator Keypad Solution

Product From Honeywell Security Group

Honeywell’s Vindicator Keypad Solution is the first map-based touchscreen system of its kind to provide situational awareness and faster communications, helping security personnel locate and respond to security events faster and more efficiently. The

Get Info Now

SHIELDKey Wireless Panic Button

Product From SHIELDtech Inc.

During a crisis it is challenging to keep calm and rational. At SHIELDtech Inc., we make things simple by giving users access to police at the push of a button. Without having to find, unlock, then dial a phone, users are able to notify police of an emergency instantly and discretely. Police will be provided with personal user information quickly and track the GPS location of the emergency.

Get Info Now

IP-Based Panic Solutions

Product From Metis Secure Solutions

PITTSBURGH—Metis Secure has launched a new line of IP-based “panic” solutions that people use to instantly and discreetly summon police or security if danger strikes. For emergency responders, the

Get Info Now