Terminus’ Fence Intrusion Detection System

Terminus’ Fence Intrusion Detection System

Terminus’ Fence Intrusion Detection System Product Image

Protecting life and property is priority one, and the Fence Intrusion Detection System (F.I.D.S.) from Terminus helps security dealers and integrators meet that need perfectly.

Terminus (formerly known as Litton), brings to market its impressive Fence Intrusion Detection System. It uses shock sensors to detect the vibrations, or shock waves, caused by intrusion attempts. These can include someone cutting the fabric, climbing the fence and/or lifting the fence material. These shock waves are detected by the Terminus sensors, which send a signal to a Terminus electronic processor to analyze and then report its status to the main alarm control panel. This immediate response lets the owner and law enforcement know about an intrusion while it is taking place.

The Fence Intrusion Detection System prevents intruders from entering undetected and spares end users from the loss of valuable merchandise and equipment. The cost effective, reliable perimeter protection system from Terminus is UL-Listed and protected by a 10 year limited warranty against defects in materials and workmanship.

The Terminus Pass-Thru Fence Kit easily integrates into any perimeter fence. It includes a shock sensor with dual, gold-plated contacts hermetically sealed to ASTM standards in a Pass-Thru condulet housing, which allows conduit to be mounted to the fence with minimal bending and few connectors. T-Fittings are eliminated, saving on material cost and labor. Dual contacts mean fewer false alarms because both contacts must be activated simultaneously to cause an alarm. The weather-resistant housing helps eliminate moisture and airborne contaminants that can cause open or short conditions in other shock sensors. It's available with 1/2" or 3/4" threads, comes with a fence post mounting clamp, and conforms to NEMA standards 8-10. The kit also comes complete with a molded insert for the sensor, and a metal clamp.

Terminus shock sensors have earned their reputation for reliability and are used effectively on thousands of miles of outdoor chain link fence. Engineered to withstand severe outdoor environments, the fence kits reliably detect intrusions even when temperatures drop as low as -40 degrees Fahrenheit, or rise as high as 160 degrees Fahrenheit.

Installers can program the system to respond only to the condition(s) the system user deems to be an actual alarm that requires action. Pedestrian traffic, vehicular movement or other ambient conditions are factors that can be taken into account when programming the processor, virtually eliminating nuisance alarms. The processor also allows the system user to pinpoint the area of alarm - a requirement for larger fences.

For more information about the complete line of Terminus perimeter detection systems, call 1-866-680-TERM (8376) or visit www.terminusproducts.com.

Expand for more details on this Product

FlexZone fence-mounted sensor

Product From Senstar Inc.

Senstar is pleased to announce FlexZone™, the latest generation ranging fence-mounted sensor. FlexZone detects and locates any attempt to cut, climb or otherwise break through the fence. It accurately locates intrusions even when there are multiple simultaneous intrusions and in the presence of background environmental noise.

Get Info Now

Digital Barriers's SafeZone-edge

Product From Digital Barriers

London,, UK -- March 31,  2014 -- : Digital Barriers will launch SafeZone-edge, its world-leading, edge-embedded automated intrusion detection system, at Counter Terror Expo 2014.

SafeZone-edge avoids the cost and complexity of server-based video analytics systems by undertaking the video processing on the camera. Crucially, while extremely simple to install and operate, SafeZone-edge is also one of the very few edge-based systems to receive the ultimate performance benchmark provided by the internationally recognized UK Home Office i-LIDS scheme. In February 2014, SafeZone-edge was certified as an i-LIDS approved primary detection system for operational alert use in sterile zone monitoring applications.

Get Info Now

Ironclad perimeter intrusion detection system

Product From RBtec Perimeter Security Solutions

RBtec perimeter security systems provide wide range of innovative perimeter security solutions announces that its range of Ironclad fence sensor kits at ADI Global, the largest security distributor in the country.

Get Info Now

FiberPatrol FP1100-X system

Product From Optellios, Inc

Newtown, PA – [January 13, 2014] – The FiberPatrol FP1100-X system features the most advanced fiber-optic sensor technology available for fence-line perimeter monitoring. The FP1100-X can pinpoint the location of an intrusion attempt to within one or two fence panels. Multiple simultaneous events, such as coordinated intrusions, can be effectively detected and located. The system reports the coordinates of an attempted breach, which can be used for activating corresponding PTZ camera presets and for personnel dispatch. The location-sensing ability also enables the system to ignore non-localized disturbances, such as those produced by wind and rain.

Get Info Now

JETprotect's ActiveSentry Perimeter Security System

Product From JETprotect

SAN JOSE, Calif. – December 2, 2013 – JETprotect’s automated safety and protection product, ActiveSentry, was independently tested at a US international airport. Intrusion scenarios and environmental monitoring were included in the evaluation.

Get Info Now

Gallagher's K20 Tensioner Link System and Z10 Tensioner Sensor System

Product From Gallagher

Gallagher has introduced the K20 Tensioner Link System, a perimeter fence hardware solution which offers both improved performance and aesthetics. The product has been developed to enable faster and increasingly consistent installation of the system while providing enhanced security and easier maintenance and trouble-shooting.

Get Info Now

FFT's Aura SR and Aura LR Fiber Optic Intrusion Detection systems

Product From Future Fibre Technologies Inc.

FFT Aura SR and FFT Aura LR are the latest addition to FFT’s family of fiber optic intrusion detection systems, delivering both sensitivity and flexibility in intrusion detection applications, as well as protecting buried pipelines and their contents against damage and theft.

Get Info Now

Perimeter intrusion detection line from Senstar

Product From Senstar Inc.

Senstar will showcase part of its largest perimeter intrusion detection portfolio at ISC West booth 13133, focusing on commercial/industrial, criminal justice and critical infrastructure facilities. The products being presented by the company include OmniTrax buried cable sensor, FiberLR long range fiber optic sensor, FlexPS fence mounted sensor, and FlexPI indoor sensor. In addition to PIDS sensors, Senstar will be highlighting its line of man-down personal duress and alarm systems - Flash and Flare.

Get Info Now

Takex OMS-12FE Outdoor PIR Intrusion Detector

Product From Takex

Santa Clara, CA November 1, 2012: TAKEX, the quality leader in security sensors, announced today the introduction of the OMS-12FE, a new slim profile outdoor PIR (passive infrared) intrusion detector with dual-zone detection capability.

Get Info Now

Optex's SL-350QFR Quad-Beam Photoelectric Detector

Product From Optex Inc. Security Products

Chino, California, July 26th, 2012— Optex expands on its industry leading outdoor battery powered intrusion line by adding the SL-350QFR, a 350 ft. battery-powered photoelectric detector requiring no trenching or wiring. “Even with the success of our 100 ft. and 200 ft. battery-powered beams, there were still larger applications where too many beams sets would be required. With the SL-350QFR, we will be able to not only offer a more cost-effective solution for these larger sites, but also offer additional features that our customers asked for, such as quad beam detection and extended battery life of up to 10 years,” says Scott Simmons, Vice President of Sales.

Get Info Now