GarrettCom Magnum 10RX Configurable Router and Security Appliance

GarrettCom Magnum 10RX Configurable Router and Security Appliance

No image available.

San Diego, Calif. – January 29, 2013 – Belden Inc. (NYSE: BDC), a global leader in signal transmission solutions for mission critical applications, introduces the GarrettCom Magnum 10RX Configurable Router and Security Appliance, which offers advanced layer 3 networking protocols, firewall and secure virtual private networking for heavy duty industrial applications where high performance and security are required. The product is being displayed at the DistribuTECH Convention and Exhibition at the San Diego Convention Center on January 29-31 in Belden’s booth #3427. The 10RX is designed for mission-critical applications such as power utility substations, smart grid deployments and other industrial networks with multi-protocol requirements, tight security directives and quality of service demands. It supports mixed TCP/IP and legacy protocols, a requirement of many existing substations.

 The 10RX, like all of the GarrettCom and Hirschmann brand products from Belden, offers flexible configurations and the high degree of reliability required for interworking between substations or other mission critical network elements.

 Flexible WAN Connectivity and High Performance

A configurable WAN router with up to 10 Gigabit Ethernet ports, 16 T1/E1 ports or 32 serial connections, the 10RX also provides protocol support for legacy as well as MPLS interoperability. The 10RX, a member of the Magnum 10-series next generation line of substation connectivity products, incorporates a new hardware and software architecture designed for maximum speed and flexibility. Its advanced Industrial Network Operating System (INOS) supports a wide range of routing protocols including RIP, OSPF, BGP and others, and it is compatible with Magnum MNS-DX management software.

 Security

Cyber security capabilities include both electronic perimeter protection for remote sites and management security for the 10RX.  Advanced statistics and event recording are available with downloadable local logs, SNMP MIBs and traps and syslog remote logging.

 The integrated firewall ensures maximum perimeter protection with features such as address/port inspection and filtering, and secures VPN connections with strong 3DES and AES encryption.  The 10RX also has integrated hardware assist for encryption to maximize the number of secure VPN channels available to network designers.

 Reliability

The 10RX provides advanced thermal management and dual hot-swappable power supplies for maximum uptime and reliability. The 10RX appliances are available in both fan-cooled and fan-less models and are built using thermal design techniques that result in cooler operation of internal electronic components, leading to longer lifetime and increased availability. The software monitors each power supply and signals when a power supply fault is detected. Power supplies can be readily swapped without interruption to the system.

Substation-hardened Design

The 10RX comes with a hardened metal case and auto-ranging power supplies for operation with standard AC power (worldwide) or internal DC power supply choices. Case options are available for either regular or reverse rack-mounting; conformal coating is optional to provide protection from moisture or corrosion.

 Standards

The 10RX conforms to significant industry standards including: UL/cUL 60950, EN55022 FCC Part 15 CE, EMC & ENV, IEC61850-3 EMC and Environmental Operating Conditions Class C for Power Substations, IEEE 1613 Class 2 Environmental Standard for Electric Power Substations, NEMA TS-2 Traffic Control and EN50155 Railways.

 Availability

The 10RX is now available for order. For more information on the GarrettCom Magnum 10RX Configurable Router and Security Appliance, request Product Bulletin #384, visit www.belden.com or call 1-800-BELDEN-1 (1-800-235-3361).

 GarrettCom, a Belden Brand, designs and manufactures industrial networking products for specialty and stressed applications globally. Heavy duty products include managed and unmanaged switches, media converters, fiber links, multi-protocol routers and terminal servers and cyber security solutions. GarrettCom’s products are used in applications where high reliability under harsh conditions is a primary consideration. These include power utility substations and similar smart grid operations centers, surveillance and physical security, transportation facilities, industrial and factory automation, telecommunications, defense, water treatment and outdoor applications.

 About Belden

St. Louis-based Belden Inc. designs, manufactures, and sells connectivity solutions for markets including industrial, enterprise, and broadcast. It has approximately 6,800 employees, and has manufacturing capabilities in North America, South America, Europe, and Asia, and a market presence in nearly every region of the world. Belden was founded in 1902, and today is a leader with some of the strongest brands in the signal transmission industry. For more information, visit www.belden.com.

Expand for more details on this Product

Altronix's Pace Long Range Ethernet Adapters

Product From Altronix Corporation

Atlanta, GA (September 29, 2014) – Altronix, the leading manufacturer of low voltage power supplies and transmission solutions for the electronic security industry, is displaying its new line of Pace™ Long Range Ethernet Adapters here at ASIS 2014. New Pace models include receivers with one, 4, 8 and 16 ports, and full duplex 100Mpbs at distances up to 500m over CAT5e without repeaters. The one port receiver accommodates single twisted pair (UTP) cabling up to 150m.  

Get Info Now

ComNet's Reliance RLFDX Series Serial Data Link

Product From Comnet

Danbury, CT. Sept. 12, 2014, ComNet, Communication Networks of Danbury, Connecticut, a USA-based manufacturer of fiber optic transmission and networking equipment, has further expanded the Reliance line by introducing the RLFDX Series of substation-rated fiber optic RS-232, RS-422, RS-485 2/4 Wire, & TTL Logic Data Link/Repeater. The ComNet Reliance RLFDX Series of products are made in the USA and are a direct replacement for the Garrettcom/Dymec5800 series of serial data over optical fiber products.  The Reliance RLFDX products can be used wherever those products were previously used.

Get Info Now

APX-120N5 Point-to-Point Preconfigured Wireless Outdoor Bridge

Product From Antaira Technologies (formerly Aaxeon Technologies)

Anaheim, CA – May 6, 2014 – Antaira Technologies is a leading developer and supplier of Device Networking and Industrial Communication products and is proud to introduce its first-ever long distance Point-to-Point Preconfigured Wireless Outdoor Bridge called the APX-120N5.  

Get Info Now

9-Inch Ergo Crimp Tool

Product From Platinum Tools

CAMARILLO, Calif., June 2, 2014 - Platinum Tools (www.platinumtools.com), the leader in solutions for the preparation, installation, hand termination and testing of wire and cable, is proud to announce the debut of the 9-Inch Ergo Crimp Tool (p/n 16500) at InfoComm 2014, held from June 18-20 at the Las Vegas Convention Center, booths C5238 & N368j. The 9-Inch Ergo Crimp Tool is now shipping with an MSRP of $39.95.

Get Info Now

Vigitron's Vi3026 10-port PoE Switch

Product From Vigitron Inc,

Vigitron introduces the Vi3010, the 10-port version of the highly popular Vi3026 port network PoE switch with the same unique features. Its PoE power budget is 180W. All ports can provide up to 15.4W (802.3af) and 6 of the ports up to 30W (802.3at) PoE power.

Get Info Now

ComNet's Netwave NW8 Wireless Perimeter Transmission Solution

Product From Comnet

Danbury, CT. May 21, 2014, ComNet, Communication Networks of Danbury, Connecticut, a USA-based manufacturer of fiber optic, wireless and copper transmission and networking equipment, has introduced the NetWave NW8 wireless Ethernet link that is designed to support redundant ring and “Drop-and-Insert” functionality on a wireless network. The NW8 is a dual radio version of the recently introduced NW series of environmentally hardened wireless Ethernet products.

Get Info Now

ET4500C PoE network switch

Product From Nitek International LLC

Nitek proudly announces the introduction of the ET4500C to the rapidly expanding family of Etherstretch IP over Coax transmission products. The ET4500C is a unique 4 port PoE network switch which integrates our Etherstretch technology allowing the IP data to transmit over coaxial cable up to 1,640 feet (500 Meters).

Get Info Now

eConsole Network Management Software for ComNet Ethernet Switches

Product From Comnet

Las Vegas, NV. April 2, 2014, ComNet, Communication Networks of Danbury, Connecticut, a USA-based manufacturer of fiber optic, wireless and copper transmission and networking equipment, has introduced a new software suite designed to manage and monitor Ethernet network devices. The eConsole suite allows users to mange, be informed of critical situations, and provide immediate recovery assistance in the event of a network challenge.

Get Info Now

Axis' T8646 PoE+ over Coax Blade

Product From Axis Communications

CHELMSFORD, Mass. – April 10, 2014 – Axis Communications, the global leader in network video surveillance, today announces AXIS T8646 PoE+ over Coax Blade for a multi-channel migration solution to IP video that leverages a building’s existing coaxial infrastructure to connect to new IP cameras.

Get Info Now

ComNet's NetWave NW7 Wireless Ethernet Link

Product From Comnet

Las Vegas, NV. April 2, 2014, ComNet, Communication Networks of Danbury, Connecticut, a USA-based manufacturer of fiber optic, wireless and copper transmission and networking equipment, has introduced the NetWave NW7 wireless Ethernet link that is designed for high throughput point-to-point or multi-point applications.

Get Info Now