i4 Series Combination Carbon Monoxide (CO)/Smoke Detector

i4 Series Combination Carbon Monoxide (CO)/Smoke Detector

i4 Series Combination Carbon Monoxide (CO)/Smoke Detector Product Image

St. Charles, IL (April 1, 2013) – System Sensor today announced that it has launched its new i4 Series Combination CO/Smoke Detector and Integration Module. The i4 Series is the first low-voltage, system-connected, combination smoke and carbon monoxide detection solution on the market. With the ability to integrate the i4 into conventional security and fire panels, System Sensor customers can rest assured knowing they are providing the most comprehensive life safety solution for homeowners to date.

The i4 series is available in 2-wire and 4-wire versions, both with industry leading photoelectric smoke and electrochemical CO sensing technologies. The required i4 Integration Module greatly simplifies installation. Since the module sits next to the panel, the system uses about 75 percent fewer wires. This translates into lower installation cost and time without sacrificing performance. The i4 module is also compatible with System Sensor’s industry leading i3 Series smoke detectors with thermal sensors and built-in sounders, making it ideal for both new installations and retrofits. In fact, System Sensor customers can integrate up to 12 devices on a loop – in any combination of i4 and compatible i3 Series detectors. 

“Our i4 Series combination detector can be a big competitive advantage for our customers,” says Justin Mayer, System Sensor Product Marketing Manager. “With i4, our customers will be able to install more systems in less time and at less cost, leading to higher RMR and increased profits…all while providing homeowners with the highest levels of protection available. And with less devices on the wall or ceiling than the separate device solution, our customers can overcome homeowners’ aesthetic objections to including CO with their fire and security systems.”

Learn more at systemsensor.com/i4.

 

Expand for more details on this Product

ELK-6050 Two-Way Wireless Smoke Detector

Product From Elk Products Inc

HILDEBRAN, NC – ELK Products, a premier manufacturer of security and automation solutions, is pleased to announce the ELK-6050 Two-Way Wireless Smoke Detector will be available and on display at ISC West Booth #7033.

Get Info Now

Elk Products' ELK-6050 Wireless Smoke Detector

Product From Elk Products Inc

HILDEBRAN, NC – ELK Products, a premier manufacturer of security and automation solutions, is pleased to announce the ELK-6050 Two-Way Wireless Smoke Detector will be available and on display at ISC West on April 1st, 2014 in Booth #7033.

Get Info Now

Silent Knight’s SK-FIRE-CO Detector

Product From Silent Knight

NORTHFORD, Conn., Nov. 20, 2013 - Silent Knight by Honeywell today introduced a single detector that senses both fire and carbon monoxide (CO) and greatly reduces nuisance alarms. The SK-FIRE-CO Detector minimizes parts and labor, equaling big cost reductions. It is also the only non-proprietary, addressable detector of its kind to be made readily available through Security Equipment Distributors nationwide, which ensures competitive pricing and readily available parts.

Get Info Now

DDA Analog Addressable Duct Detector

Product From Potter Electric Signal Company

St. Louis, MO-- Potter Electric Signal Company, LLC of St. Louis, Missouri USA, announces the release of the DDA Analog Addressable Duct Detector.  This device provides early detection of smoke and products of combustion present in air moving through HVAC ducts in commercial, industrial and residential applications. The

Get Info Now

Gamewell-FCI's 4-Warn/CO Detector

Product From Gamewell-FCI

NORTHFORD, Conn., November 8, 2013 - Gamewell-FCI by Honeywell recently introduced the 4-Warn/CO detector to meet new code requirements and reduce material and labor costs by combining both fire and carbon monoxide (CO) detection into one device. Working with a number of New York City hotels, local Gamewell-FCI Distributor, Signature Building Systems, continues to utilize the 4-Warn/CO detector (part# MCS-COF) to ensure these facilities meet new requirements for commercial sleeping establishments.

Get Info Now

Notifier's Intelligent FAAST Detector

Product From Notifier

NORTHFORD, Conn., October 31, 2013 – NOTIFIER by Honeywell introduces a new intelligent version of its FAAST (Fire Alarm Aspiration Sensing Technology) detector, made to provide very early warning of smoke for high-value and critical facilities, as well as within extremely challenging applications. The intelligent

Get Info Now

C-TEC's ActiV Smoke and Heat Detectors

Product From C-TEC

C-TEC has launched its own range of conventional smoke and heat detectors.

Branded 'ActiV', the detectors have been third-party certified to the relevant parts of EN54 parts 5, 7 and pr29 by leading notified approval body, Intertek, and are available to purchase today.

Get Info Now

Valor Fire Safety's ESP Advanced Smoke Detection

Product From Valor Fire Safety

Londonderry, NH - Valor Fire Safety, LLC will introduce its External Sampling Photoelectric (ESP) Advanced Smoke Detection on June 10th -12th at the National Fire Protection Association (NFPA) Conference & Expo in Chicago. ESP Advanced Detection eliminates the smoke entry lag time associated with conventional ionization and photoelectric smoke detectors by directly measuring the ambient smoke concentration outside the detector. The technology delivers faster and more reliable detection in residential and commercial buildings.

Get Info Now

Steel Web Stopper

Product From STI

This UL-listed protector from Safety Technology International, STI-9601, is recommended for areas where abuse to smoke detectors is severe. The Stopper is constructed of nine-gauge steel wire with corrosion resistant polyester coating, making it extremely difficult to break. Fast and easy to install, it is available in flush or surface mount with multiple sizes to cover virtually every smoke detector available. It can be used with a variety of low profile, high profile and large array of other smoke detectors.

Get Info Now

GN-503FF smoke and carbon monoxide detector

Product From Gentex Corporation

Gentex Corporation (ISC-West 2013 Booth # 10079) has released a combination photoelectric smoke and carbon monoxide (CO) alarm with two (2) sets of Form A/Form C relay contacts activating independently for smoke and CO events. The GN-503FF utilizes photoelectric and electrochemical sensing technology performance wherever smoke and CO detection is required. The GN-503FF is a 120VAC hard wired alarm with 9VDC battery back-up, includes tandem interconnect capabilities, differentiating signals for each alarm type annunciation, quick disconnect wire harness, low or missing battery indicator, and push button self and functionality test.

Get Info Now