comCables Cat5e2 cable

comCables Cat5e2 cable

comCables Cat5e2 cable Product Image

Denver, CO, -- July 23, 2013 -- comCables is pleased to release its new Cat 5e2 Plenum Cable. From the design of the “Easy-Feed” box down to the engineering of the twisted pairs, the 100 MHz plenum cable is installer-friendly and its performance exceeds its 100 MHz rating. The rigid, thin design prevents bending and twisting, making for an easy installation.

The new outer jacket design is durable and tough yet easy to remove when needed, and there's no rip cord to delay installation time. Made in the USA of Solid 24 AWG Copper, it features sequential footage marking and is ETL listed and performance verified. The 5e2 Plenum Cable is now available at comCables Authorized Distributors. A video highlighting the features and benefits can be viewed at www.youtube.com/watch?v=oMLCB86U744

comCables, a Tier 1 manufacturers of structured cabling, is headquartered in Denver, Colorado. comCables manufactures a complete end to end solution of copper and fiber structured cabling products. comCables products range from Residential to Enterprise systems while focusing on standards based performance. They exceed TIA code and standards and meet all ETL and UL certification requirements. http://www.comcables.com/

Expand for more details on this Product

Fire Alarm Cable

Product From Vericom Global Solutions

Vericom Global Solutions, a leading manufacturer of HDMI cablesTV mounts and structured cabling, is pleased to offer 1,000 foot pull boxes of fire alarm cable.  Vericom fire alarm cable are composed of copper wires contained inside of a FPLR rated red jacket.  All models of Vericom fire alarm cable are approved for 300 volts, with a temperature range of -10°C to 75°C.

Get Info Now

Feed-through patch panels

Product From Cablesys

Fullerton, California - Cablesys introduces the new 24 port, 1RMU feed-through patch panels.

 

With RJ-45 ports on both sides, the feed-through patch panels are ideal for existing data centers which require additional patching. The feed-through patch panels are less messy than traditional punch down patch panels and even perform better. If used with Cablesys high performance patch cords, they will surpass Channel or Permanent Link performance standards per ANSI/TIA-568.  Panels are easy to install by IT professionals and mounting screws are included.

Get Info Now

Patch Panel Line

Product From ComCables

comCables is pleased to announce the newest patch panel additions to their product line. comCables’ Cat 5E 110 Style 12 Port Mini Patch Panel, Cat 6 110 Style 12 Port Mini Patch Panel, 24 Port Unloaded Modular 1U Patch Panel and 48 Port Unloaded Modular 2U Patch Panel all aim to add strong value to comCables existing product line and brand. The Cat 5E 110 and Cat 6 110 Style 12 Port Mini Patch Panels are constructed of high impact, flame resistant plastic. New raised, D-style mounting brackets allow for more efficient cable routing and easier access to a terminated panel when troubleshooting. Its unique ID windows are hinged to prevent loss and for easy identification.

Get Info Now

Middle Atlantic Products' Series Protection and 2-Stage Compact Surge Devices

Product From Middle Atlantic Products

Fairfield, NJ––The new Series Protection™ and 2-Stage Compact Surge Devices from Middle Atlantic Products establish new industry standards for reduced size, rapid response time and comprehensive surge protection.

Get Info Now

Altronix's Pace Long Range Ethernet Adapters

Product From Altronix Corporation

Atlanta, GA (September 29, 2014) – Altronix, the leading manufacturer of low voltage power supplies and transmission solutions for the electronic security industry, is displaying its new line of Pace™ Long Range Ethernet Adapters here at ASIS 2014. New Pace models include receivers with one, 4, 8 and 16 ports, and full duplex 100Mpbs at distances up to 500m over CAT5e without repeaters. The one port receiver accommodates single twisted pair (UTP) cabling up to 150m.  

Get Info Now

ComNet's Reliance RLFDX Series Serial Data Link

Product From Comnet

Danbury, CT. Sept. 12, 2014, ComNet, Communication Networks of Danbury, Connecticut, a USA-based manufacturer of fiber optic transmission and networking equipment, has further expanded the Reliance line by introducing the RLFDX Series of substation-rated fiber optic RS-232, RS-422, RS-485 2/4 Wire, & TTL Logic Data Link/Repeater. The ComNet Reliance RLFDX Series of products are made in the USA and are a direct replacement for the Garrettcom/Dymec5800 series of serial data over optical fiber products.  The Reliance RLFDX products can be used wherever those products were previously used.

Get Info Now

Platinum Tools' Tele-Titan Xg 2.0 10Gig Termination Tool

Product From Platinum Tools

NEWBURY PARK, Calif., Aug. 19, 2014 - Platinum Tools, the leader in solutions for the preparation, installation, hand termination and testing of wire and cable, is proud to announce the debut of the Tele-Titan™Xg 2.0 (p/n 12516) during CEDIA Expo 2014, held in Denver from Sept. 11-13 at the Colorado Convention Center, booth #500. The next generation 10Gig termination Tool is now shipping.

Get Info Now

Platinum Tools' 500 MCM Cable Cutter

Product From Platinum Tools

CAMARILLO, Calif., July 3, 2014 - Platinum Tools, the leader in solutions for the preparation, installation, hand termination and testing of wire and cable, is proud to announce the launch of the new 500 MCM Cable Cutter (p/n 10569). The 500 MCM Cable Cutter is now shipping with an MSRP of $139.95.

Get Info Now

APX-120N5 Point-to-Point Preconfigured Wireless Outdoor Bridge

Product From Antaira Technologies (formerly Aaxeon Technologies)

Anaheim, CA – May 6, 2014 – Antaira Technologies is a leading developer and supplier of Device Networking and Industrial Communication products and is proud to introduce its first-ever long distance Point-to-Point Preconfigured Wireless Outdoor Bridge called the APX-120N5.  

Get Info Now

9-Inch Ergo Crimp Tool

Product From Platinum Tools

CAMARILLO, Calif., June 2, 2014 - Platinum Tools (www.platinumtools.com), the leader in solutions for the preparation, installation, hand termination and testing of wire and cable, is proud to announce the debut of the 9-Inch Ergo Crimp Tool (p/n 16500) at InfoComm 2014, held from June 18-20 at the Las Vegas Convention Center, booths C5238 & N368j. The 9-Inch Ergo Crimp Tool is now shipping with an MSRP of $39.95.

Get Info Now