Notifier First Command Emergency Communication System

Notifier First Command Emergency Communication System

Notifier First Command Emergency Communication System Product Image

NORTHFORD, Conn. – NOTIFIER by Honeywell (NYSE: HON) introduces the First Command emergency communication system (ECS), designed to seamlessly interface with virtually any commercial fire alarm to provide a system for broadcasting live and pre-recorded general messages and emergency alerts. By leveraging the code-required intelligible, survivable, fully-supervised qualities of new and existing fire alarm systems, First Command offers small, standalone facilities an ECS that is both economical and highly-reliable.

“The demand for a suitable ECS for smaller buildings like churches and offices and theatres is steadily rising,” states Marissa Guillen, Marketing Communications Manager, NOTIFIER. “Our goal was to make a flexible system that people could depend on and easily understand how to operate just by looking at it.”

First Command’s scalable design allows the system to be tailored to fit the needs of a single building, with ample capacity for future expansions. Every First Command system can support a combination of up to eight remote control panels and microphone consoles, which can be installed at easy access points throughout a facility.

As many as 14 pre-recorded messages can be customized for a facility to utilize for emergency alerts, as well as day-to-day notifications. With a maximum message length of one minute, First Command can support detailed instructions and bi-lingual communications. This system can also be used for non-emergency functions such as live paging or background music.

First Command joins NOTIFIER’s broad line of fire alarm and emergency communication solutions, capable of protecting facilities and campuses of any size or type. Whether intending to reach occupants within a building or people in an outdoor stadium, or across an expansive military base, NOTIFIER’s communication systems deliver highly effective, attention-grabbing results. Graphic displays, LED signage, and even distributed recipient technologies such as email, text messages and computer pop-ups are additional capabilities NOTIFIER offers to help facility managers and security directors ensure the right messages reach the right people.

More information on First Command and other NOTIFIER fire alarm and emergency communication solutions is available on www.notifier.com. To locate a local NOTIFIER engineered systems distributor for a product demonstration, contact a regional sales manager.

Expand for more details on this Product

6400 Series Exit Stopper

Product From Safety Technology International Inc. (STI)

April 29, 2014 – STI’s Exit Stopper continues to help solve the problems of unauthorized exits and entries of fire or emergency doors. The multifunction door alarm is excellent in helping increase workplace security.

Get Info Now

SimplexGrinnel's 4007ES Fire Alarm Panel

Product From SimplexGrinnell

LAS VEGAS, Nevada (June 9, 2014) – Furthering its commitment to bring customers the benefits of technology and innovation, Tyco SimplexGrinnell is introducing the Simplex 4007ES – a small, expandable fire alarm panel offering features and functionality normally associated with large systems.

Get Info Now

Cooper Notification's Wheelock Exceder LED Low Frequency Sounder Line

Product From Cooper Notification

LONG BRANCH, N.J. … Power management company Eaton today announced that its Cooper Notification business has introduced the Wheelock Exceder LED low frequency sounder line. These new products represent a first in the industry and are designed to meet both the National Fire Protection Association’s (NFPA) fire alarm and carbon monoxide 520 Hertz (Hz) code requirements for sleeping areas.

Get Info Now

FS-6000 flame sensor

Product From Takex

Takex's flame sensor FS-6000 immediately detects ultraviolet rays contained in flames and outputs a warning message and activates an external output. The sensor and speaker combined body can be installed either indoors or outdoors.

Get Info Now

SK-F485C Wire to Fiber Converter

Product From Silent Knight

NORTHFORD, Conn., May 14, 2014 - Silent Knight by Honeywell (NYSE: HON) today released the SK-F485C Wire to Fiber Converter, designed to allow new and existing Silent Knight systems to significantly increase wire runs between fire alarm control panels and power supplies, while providing a major boost in surge protection. Being the first wire to fiber converter to be UL listed for a non-proprietary line of fire alarm systems and sold over-the-counter at Security Equipment Wholesalers nationwide, allows Silent Knight to offer the ideal solution to large facilities and multi-building campuses seeking non-proprietary fire alarm systems.   

Get Info Now

Commander4 Series Selectable Candela Evacuation Signals

Product From Gentex Corporation

The Commander4 Series Selectable Candela Evacuation Signals from Gentex are ceiling-mount strobe or horn/strobe combination devices that offer dependable audible and visual alarms and the lowest current consumption. 

Get Info Now

Talkaphone's ETP-SML surface mount

Product From Talk-A-Phone Company

Talkaphone has introduced its updated LED Lighted Surface Mount Accessory featuring a new sleek, contemporary contoured design that improves the functionality of an emergency phone in small areas where both space-savings and security are desired.

Get Info Now

DSC’s PowerSeries Neo Detectors, Keys and Sirens

Product From DSC, Tyco Fire & Security

LAS VEGAS — March 31, 2014 –– DSC, part of the Security Products business unit of Tyco (NYSE: TYC), announces the introduction of more than a dozen detectors, keys, sirens and related devices that are all powered by the ground-breaking PowerG wireless technology and compatible with DSC’s PowerSeries Neo platform.

Get Info Now

Fire-Lite Alarms' Lite-Connect Multi-Mode Fiber Solution

Product From Honeywell Fire Sys - Fire-Lite

Northford, Conn. – Fire-Lite Alarms by Honeywell today released the Lite-Connect multi-mode fiber solution, designed to join as many as 16 remote fire alarm control panels together to report all systems’ signals to a central monitoring station as one. This centralized reporting method eliminates significant telecommunications costs to communicate signals from each individual panel. More details are reported on all systems’ events, as opposed to the traditional method of running copper signaling line circuits between buildings. The use of multi-mode fiber optic cable to connect panels offers robust protection from common ground faults, and other electrical surges, many times caused by lightning strikes.

Get Info Now

Fire-Lite Alarms' Remote Telephone Zone Module (RTZM)

Product From Honeywell Fire Sys - Fire-Lite

Northford, Conn. – Fire-Lite Alarms by Honeywell today announced the release of the Remote Telephone Zone Module (RTZM), designed to provide authorized users remote access to send out emergency notifications through a facility’s Emergency Command Center (ECC) system via any phone. Secure system access and simple menu options, ensure facility managers and security officials get appropriate emergency information and instructions to building occupants quickly – in real-time. 

Get Info Now