Altronix eBridge 4SK Kit

Altronix eBridge 4SK Kit

Altronix eBridge 4SK Kit Product Image

Chicago, IL (September 24, 2013) – Altronix now offers more options for upgrading from analog to IP with the introduction of the eBridge 4SK kit. It allows four IP devices to replace a single analog camera over legacy coax infrastructure. The new eBridge 4SK kit consists of the eBridge4SPT transceiver with an integral four-port managed PoE+ switch that transmits IP data to the head-end, and an eBridge1SPR receiver that passes system power up the coax over 1500 feet (5X maximum Ethernet distance) without the need for repeaters.

“Our eBridge Ethernet over Coax Adapters with or without power make it easier and more cost-efficient to upgrade to IP networked systems over legacy infrastructure where it was previously not possible,” said Alan Forman, President, Altronix. “With the addition of the new eBridge4SK, a single coax cable can now accommodate and power up to four IP devices with power, versus a single analog camera with a local power source. This provides a highly efficient means of utilizing coax infrastructure with IP cameras, accessories and access control devices with tremendous cost-savings.”

The eBridge4SPT transceiver with an integral four-port managed PoE+ switch offers built-in IP management that allows for remote camera/device reset, monitoring and reporting via various IP protocols. Local or remote monitoring indicates port status, device status and real-time power consumption. Additionally, the unit’s individual ports may be enabled or disabled as desired. The eBridge4SPT also features auto detection and protection to prevent damage to legacy non-PoE cameras/devices.

The eBridge1SPR receiver sends PoE up the coax for up to four IP devices connected to eBridge4SPT transceiver. Two eBridge1SPR receivers may be powered by one Altronix Vertiline563 rack mount power supply/charger. Altronix RE2 rack mount enclosure houses optional backup batteries.

The eBridge4SK kit is UL listed in the U.S. and Canada, and CE and C-Tick approved. All Altronix products are made in the U.S.A and feature a lifetime warranty.

For more information on Altronix’s extensive line of products, call toll free
1-888-258-7669, e-mail info@altronix.com or visit www.altronix.com.

 

Expand for more details on this Product

Axis' T8646 PoE+ over Coax Blade

Product From Axis Communications

CHELMSFORD, Mass. – April 10, 2014 – Axis Communications, the global leader in network video surveillance, today announces AXIS T8646 PoE+ over Coax Blade for a multi-channel migration solution to IP video that leverages a building’s existing coaxial infrastructure to connect to new IP cameras.

Get Info Now

ComNet's NetWave NW7 Wireless Ethernet Link

Product From Comnet

Las Vegas, NV. April 2, 2014, ComNet, Communication Networks of Danbury, Connecticut, a USA-based manufacturer of fiber optic, wireless and copper transmission and networking equipment, has introduced the NetWave NW7 wireless Ethernet link that is designed for high throughput point-to-point or multi-point applications.

Get Info Now

50P Series Fiber Converter

Product From American Fibertek Inc

Las Vegas, NV (April 2, 2014) – American Fibertek Inc. (afi) is displaying a new series of multimode to singlemode fiber converters here at ISC West 2014, Booth # 10072. The new 50P Series is designed to easily and cost efficiently integrate video surveillance and security systems and devices residing on multimode fiber LANs with multimode fiber WANs on the same networked fiber platform.

Get Info Now

Altronix’s Pace1PRMT UTP/CAT5e Long Range Ethernet Adapter Kits

Product From Altronix Corporation

Las Vegas, NV (April 2, 2014) – Altronix, the leading manufacturer of low voltage power supplies and transmission solutions for the electronic security industry, is introducing the company’s new Pace™ Long Range Ethernet Adapters here at ISC West. The latest addition to Altronix’s expanding line of adaptive transmission solutions, Pace1PRMT makes it possible for users to upgrade surveillance and security systems with new IP cameras and edge devices using existing or legacy infrastructure at distances greater than 100m (328 ft) without repeaters.

Get Info Now

Altronix’s eBridge100RMT Ethernet-over-Coax/CAT5e Adapters Kits

Product From Altronix Corporation

Las Vegas, NV (April 2, 2014) – Altronix, the leading manufacturer of low voltage power supplies and transmission solutions for the electronic security industry, is introducing the newest addition to its family of eBridge™Plus products here at ISC West. eBridge100RMT Ethernet over Coax/CAT5e Adapter Kits transmit full duplex data at 100mbps and pass PoE compliant power over coax 304m (1000 ft), or CAT5e cable up to 500m (1640 ft) without repeaters.

Get Info Now

EDS-P510A-8 PoE+ Ethernet Switch

Product From Moxa

BREA, CA, FEBRUARY 14, 2014 - Moxa, a leader in intelligent industrial networking solutions, is leveraging its extensive technological resources to introduce one of the world's first PoE+ Ethernet switches engineered to perform in harsh outdoor and industrial manufacturing environments, featuring 3KV LAN surge protection and a wide temperature range (-40°C to +75°C) that ensures the highest reliability of PoE systems while delivering network speeds of up to 1000 Mbps to eliminate bottlenecks.

Get Info Now

Vi3026 26-port PoE network switch

Product From Vigitron Inc,

Vigitron is pleased to announce the release of Vi3026 the first high power managed 26-port PoE network switch designed specifically for IP camera CCTV systems. Its user interface is easy to use and offers innovative features to protect your network and keep it reliably operational.

Get Info Now

Comtrol's RocketLinx ES7206-XT PoE Switch

Product From Comtrol Corporation

MINNEAPOLIS, Minnesota — February 4, 2014 — Comtrol Corporation, a leading manufacturer of industrial device connectivity products, announced the release of the RocketLinx ES7206-XT Power over Ethernet switch. Comtrol’s unmanaged ES7206-XT contains four Gigabit IEEE 802.3af/at PoE ports, one Gigabit copper uplink port, and one Gigabit SFP uplink port supporting multi-mode or single-mode fiber connections. Featuring Voltage Boost technology, the ES7206-XT enables direct 12-36 VDC input supporting vehicle, building, and factory power systems while delivering reliable power to PoE devices.

Get Info Now

EL4500C IP over Coax Network Switch

Product From Nitek International LLC

Rolling Meadows, IL  - - Nitek International LLC., an industry leader in video transmission, announces the introduction of a new, highly developed environmentally hardened four port PoE+ network switch which utilizes existing coaxial cable as a 100MB backbone.

Get Info Now

Altona's AT-HDTX-WP Wall Plate Extender

Product From Altona

SAN JOSE, Calif. — Jan. 7, 2014 — Atlona, a leading AV distribution solutions provider, today announced that it is now shipping its new AT-HDTX-WP, an HDMI-to-HDBaseT wall plate extender and transmitter. With the ability to transmit HDMI signals up to 4K resolution to support UltraHD television, using power over category cable (PoCc) at distances up to 230 feet (70 meters), the AT-HDTX-WP simplifies installations while bringing improved connectivity and control to installed AV systems. 

Get Info Now