Notifier's Intelligent FAAST Detector

Notifier's Intelligent FAAST Detector

Notifier's Intelligent FAAST Detector Product Image

NORTHFORD, Conn., October 31, 2013 – NOTIFIER by Honeywell introduces a new intelligent version of its FAAST (Fire Alarm Aspiration Sensing Technology) detector, made to provide very early warning of smoke for high-value and critical facilities, as well as within extremely challenging applications. The intelligent FAAST detector’s ability to directly integrate with NOTIFIER fire alarm systems enables it to supply more detailed alarm, fault and trouble information, thereby simplifying system monitoring, maintenance and overall design.
 
The new intelligent FAAST evolves beyond the common scenarios of monitoring standalone aspiration systems, or the use of intricate and costly equipment to interface these separate systems with various fire alarm systems. FAAST requires no additional hardware, software, or special wire, and by integrating with NOTIFIER fire alarm systems like many other addressable detectors, aspiration system installation becomes very straightforward. NOTIFIER can support up to 31 intelligent FAAST detectors on a single loop for applications such as correctional facilities, data center sand warehouses where the area of coverage is expansive.
 
FAAST’s very early warning of smoke is crucial for facilities focused on minimizing property damage and business disruptions, such as museums, historic buildings, telecommunication hubs, office buildings and laboratories. Hospitals, nursing homes, prisons and other properties need the immediate warning FAAST provides to respond appropriately and diminish loss-of-life. Lastly, there are those challenging applications where high air velocities, extreme temperature fluctuations and hard-to-reach areas exist that can benefit from the flexible design and highly-sensitive detection FAAST provides.
 
Utilizing a network of pipes, the FAAST detector continuously draws air samples into its sensor. Its exclusive dual sensing technology uses a highly sensitive blue LED (light-emitting diode) to sense smoke, while an infrared laser quickly distinguishes other airborne particulates that could otherwise cause a false alarm. Through the use of complex algorithms, the detector then interprets signals from both sources to warn of smoke up to 60 minutes prior to combustion.
 
Five programmable alarm levels, the most offered by any aspiration detector, allow optimum flexibility in setting detector sensitivity levels and warnings for site-specific requirements. An exclusive Acclimate Mode feature automatically regulates system settings to stay within pre-specified parameters to adjust to current conditions and further reduce false alarms.
 
More information on FAAST and other advanced detection technologies from NOTIFIER, including detectors for fire and carbon monoxide, assorted gasses and flame, is available on www.notifier.com. To inquire about FAAST for a particular facility, contact a NOTIFIER regional sales manager.
 

Expand for more details on this Product

i4 Series Combination Carbon Monoxide (CO)/Smoke Detector

Product From System Sensor

St. Charles, IL (April 1, 2013) – System Sensor today announced that it has launched its new i4 Series Combination CO/Smoke Detector and Integration Module. The i4 Series is the first low-voltage, system-connected, combination smoke and carbon monoxide detection solution on the market. With the ability to integrate the i

Get Info Now

Honeywell's SWIFT Wireless Fire Sensing System

Product From Honeywell International Inc.

Northford, Conn.  – Honeywell announced today its new commercial wireless fire alarm solution to protect challenging applications and high-cost installations, as well as building expansions. The Smart Wireless Integrated Fire Technology (SWIFT™) detectors and modules seamlessly integrate with new and existing fire alarm systems from Fire-Lite Alarms, Gamewell-FCI and NOTIFIER.

Get Info Now

System Sensor's FAAST XT Aspirating Smoke Detectors

Product From System Sensor

St. Charles, IL (June 2, 2014) – System Sensor today announced the upcoming launch of the new FAAST XT line of aspirating smoke detectors, available in October 2014. The FAAST XT is an expanded coverage area air sampling smoke detector that uses four pipe inlets to draw air in from the protected space.

Get Info Now

FS-6000 flame sensor

Product From Takex

Takex's flame sensor FS-6000 immediately detects ultraviolet rays contained in flames and outputs a warning message and activates an external output. The sensor and speaker combined body can be installed either indoors or outdoors.

Get Info Now

ELK-6050 Two-Way Wireless Smoke Detector

Product From Elk Products Inc

HILDEBRAN, NC – ELK Products, a premier manufacturer of security and automation solutions, is pleased to announce the ELK-6050 Two-Way Wireless Smoke Detector will be available and on display at ISC West Booth #7033.

Get Info Now

Elk Products' ELK-6050 Wireless Smoke Detector

Product From Elk Products Inc

HILDEBRAN, NC – ELK Products, a premier manufacturer of security and automation solutions, is pleased to announce the ELK-6050 Two-Way Wireless Smoke Detector will be available and on display at ISC West on April 1st, 2014 in Booth #7033.

Get Info Now

Silent Knight’s SK-FIRE-CO Detector

Product From Silent Knight

NORTHFORD, Conn., Nov. 20, 2013 - Silent Knight by Honeywell today introduced a single detector that senses both fire and carbon monoxide (CO) and greatly reduces nuisance alarms. The SK-FIRE-CO Detector minimizes parts and labor, equaling big cost reductions. It is also the only non-proprietary, addressable detector of its kind to be made readily available through Security Equipment Distributors nationwide, which ensures competitive pricing and readily available parts.

Get Info Now

DDA Analog Addressable Duct Detector

Product From Potter Electric Signal Company

St. Louis, MO-- Potter Electric Signal Company, LLC of St. Louis, Missouri USA, announces the release of the DDA Analog Addressable Duct Detector.  This device provides early detection of smoke and products of combustion present in air moving through HVAC ducts in commercial, industrial and residential applications. The

Get Info Now

Gamewell-FCI's 4-Warn/CO Detector

Product From Gamewell-FCI

NORTHFORD, Conn., November 8, 2013 - Gamewell-FCI by Honeywell recently introduced the 4-Warn/CO detector to meet new code requirements and reduce material and labor costs by combining both fire and carbon monoxide (CO) detection into one device. Working with a number of New York City hotels, local Gamewell-FCI Distributor, Signature Building Systems, continues to utilize the 4-Warn/CO detector (part# MCS-COF) to ensure these facilities meet new requirements for commercial sleeping establishments.

Get Info Now

C-TEC's ActiV Smoke and Heat Detectors

Product From C-TEC

C-TEC has launched its own range of conventional smoke and heat detectors.

Branded 'ActiV', the detectors have been third-party certified to the relevant parts of EN54 parts 5, 7 and pr29 by leading notified approval body, Intertek, and are available to purchase today.

Get Info Now