FiberPatrol FP1100-X system

FiberPatrol FP1100-X system

FiberPatrol FP1100-X system Product Image

Newtown, PA – [January 13, 2014] – The FiberPatrol FP1100-X system features the most advanced fiber-optic sensor technology available for fence-line perimeter monitoring. The FP1100-X can pinpoint the location of an intrusion attempt to within one or two fence panels. Multiple simultaneous events, such as coordinated intrusions, can be effectively detected and located. The system reports the coordinates of an attempted breach, which can be used for activating corresponding PTZ camera presets and for personnel dispatch. The location-sensing ability also enables the system to ignore non-localized disturbances, such as those produced by wind and rain.

 

Based on the FiberPatrol X technology, the FP1100-X is the first and only fence perimeter security system to offer cut immunity. When a fence sensor is cut, either in an attempt to defeat security or through accidental damage, the FP1100-X system immediately reports the incident, including its exact location. Moreover, the system retains the ability to detect and pinpoint intrusion attempts up to the cut point. A self-healing sensor ring can be implemented by installing an FP1100-X sensor in a closed loop configuration. Having a self-healing FP1100-X system gives site owner an option to delay cable repairs without compromising site security.

 

FiberPatrol’s passive, all-optical fiber sensor can monitor up to 10 miles of perimeter fence without using repeaters, processors, or any other powered field components. The sensing cable is mounted directly on existing fence, requires no electrical grounding, and is unaffected by lightning storms. The per-foot cost of an installed system drops significantly with perimeter length. Using the same sensor cable for fiber-optic video and data transmission further reduces the cost of site infrastructure development.

 

As many as 50 virtual detection zones can be defined for each mile of a perimeter fence with the FP1100-X. Each zone can be linked to camera presets and can have its own sensitivity settings. Configured in this way, a typical installed system replaces an equivalent of 100s of legacy fence sensors, while providing higher performance at a fraction of the cost.

 

Features of theFP100-X System

  • Advanced Fence Sensor
  • Long Range Fiber-Optic Sensor
  • Location Sensing
  • Cut Immunity

 

About Optellios

Optellios, Inc., the leading U.S.-based fiber-optic technology company, is a provider of advanced solutions for sensing, security, and communication. The FiberPatrol® line of security products leverages patented fiber-optic sensor technologies to provide the most advanced and cost effective security solutions for military bases, airports, power plants, water treatment facilities, pipelines, secure data networks, and other critical infrastructures and high-value assets. For more information, visit www.optellios.com

Expand for more details on this Product

Remote Polling Module II (RPM II) SDK

Product From Southwest Microwave Inc

Tempe, Arizona - Southwest Microwave has expanded Software Development Kit (SDK) options for its INTREPID™ Series II perimeter intrusion detection systems (PIDS) with the addition of the Remote Polling Module II (RPM II)

Get Info Now

Z20 Disturbance Sensor

Product From Gallagher

The Z20 Disturbance Sensor from Gallagher heightens perimeter security through intelligent detection of vibration or movement of the fence structure. Alarms are generated when disturbance meets predefined criteria.

Get Info Now

Integrated Security Corp.'s Hydra Asset Protection System

Product From Integrated Security Corporation

Novi Michigan - Integrated Security Corp, manufacturer of the widely used Infinity series perimeter intrusion detection systems, announces the wireless Hydra Asset Protection System for outdoor security.

Get Info Now

FP1400 Zone-based Perimeter Intrusion Detection System (PIDS)

Product From Optellios, Inc

Newtown, PA – [February 21, 2014] – Optellios, Inc., an American owned, U.S. based developer and leading manufacturer of advanced fiber-optic sensing and security systems, is pleased to announce the release of the FP1400 to the highly acclaimed FiberPatrol family of Optellios products.

Get Info Now

FD525-HALO Perimeter Intrusion Detection System

Product From Fiber Sensys, Inc.

Fiber SenSys is pleased to announce the release of the FD525-HALO™ Perimeter Intrusion Detection System. This easy to use and install, cost-effective perimeter security solution economically addresses sites larger than 500 meters. Each FD525-HALO provides up to 25 independent zones that detects multiple intrusion attempts, and can be combined for site protection of even greater size - ideal for commercial and industrial perimeter security sites. It's the best in fiber-optic perimeter security at a very competitive price.

Get Info Now

FlexZone fence-mounted sensor

Product From Senstar Inc.

Senstar is pleased to announce FlexZone™, the latest generation ranging fence-mounted sensor. FlexZone detects and locates any attempt to cut, climb or otherwise break through the fence. It accurately locates intrusions even when there are multiple simultaneous intrusions and in the presence of background environmental noise.

Get Info Now

Digital Barriers's SafeZone-edge

Product From Digital Barriers

London,, UK -- March 31,  2014 -- : Digital Barriers will launch SafeZone-edge, its world-leading, edge-embedded automated intrusion detection system, at Counter Terror Expo 2014.

SafeZone-edge avoids the cost and complexity of server-based video analytics systems by undertaking the video processing on the camera. Crucially, while extremely simple to install and operate, SafeZone-edge is also one of the very few edge-based systems to receive the ultimate performance benchmark provided by the internationally recognized UK Home Office i-LIDS scheme. In February 2014, SafeZone-edge was certified as an i-LIDS approved primary detection system for operational alert use in sterile zone monitoring applications.

Get Info Now

Ironclad perimeter intrusion detection system

Product From RBtec Perimeter Security Solutions

RBtec perimeter security systems provide wide range of innovative perimeter security solutions announces that its range of Ironclad fence sensor kits at ADI Global, the largest security distributor in the country.

Get Info Now

JETprotect's ActiveSentry Perimeter Security System

Product From JETprotect

SAN JOSE, Calif. – December 2, 2013 – JETprotect’s automated safety and protection product, ActiveSentry, was independently tested at a US international airport. Intrusion scenarios and environmental monitoring were included in the evaluation.

Get Info Now

Gallagher's K20 Tensioner Link System and Z10 Tensioner Sensor System

Product From Gallagher

Gallagher has introduced the K20 Tensioner Link System, a perimeter fence hardware solution which offers both improved performance and aesthetics. The product has been developed to enable faster and increasingly consistent installation of the system while providing enhanced security and easier maintenance and trouble-shooting.

Get Info Now