Symmetry EN-2DBC Network Controller

Symmetry EN-2DBC Network Controller

Symmetry EN-2DBC Network Controller Product Image

Torrance, CA, March 20, 2014 – AMAG Technology introduces the Symmetry™ EN-2DBC Network Controller.  The Symmetry EN-2DBC offers a flexible, easy to install controller option for organizations looking to deploy a distributed IP-based access control system, expand their current access control system, secure only a few doors or upgrade their legacy system.

 
The Symmetry EN-2DBC supports two doors and utilizes Power over Ethernet (and PoE+), where installers need to run only a single Ethernet cable that carries both power and data to the controller.  This allows greater flexibility in locating the controller on the network and decreases installation time, saving money. 
 
Now available in a new, sleekly designed Plenum Rated enclosure, the network controller supports 90,000 card holders and 18,000 transactions.
 
The Symmetry EN-2DBC contains four general purpose inputs to monitor additional security devices or areas not equipped with a card reader.  Two general purpose outputs provide flexible options for enhanced security.
 
“End users will find the Symmetry EN-2DBC delivers a flexible and affordable solution that is easy to install,” said AMAG Technology, Product Manager, David Weinbach.  “The additional inputs and outputs provide additional flexibility and will enhance security in any situation.”
 
The Symmetry EN-2DBC requires the newly released Symmetry V8.0.1 access control software, and can be used with Symmetry Business, Professional and Enterprise versions.
 
The Symmetry EN-2DBC:
 

  • Provides two door support
  • Supports Wiegand and Symmetry MCLP reader protocols
  • Uses Power over Ethernet (PoE and PoE+ supported)
  • 4 auxiliary inputs/2 auxiliary outputs
  • Can operate with Symmetry Business, Professional and Enterprise versions.
  • Supports 90,000 card holders
  • Supports 18,000 transactions
  • Provides SNMP support
  • Requires Symmetry V8.0.1 or higher to operate

 
For information about AMAG’s Symmetry EN-2DBC Network Controller contact your Regional Sales Manager, call 310-518-2380 or visit www.amag.com.
 
 
About AMAG Technology
AMAG Technology’s Symmetry Security Management and Video Solutions can be found in a wide spectrum of markets:  government, commercial, education, transportation, healthcare, utilities and banking.  Based out of Torrance, California with sales and support located throughout the US, AMAG sells its Symmetry Product Portfolio of access control and network video systems through its Symmetry Authorized Resellers throughout North America.  AMAG Technology is part of G4S Technology, a leading manufacturer of scalable, integrated security management systems headquartered in Tewkesbury, Gloucestershire, England.  AMAG Technology has been at the leading edge of access control technology for over 40 years.
 

Expand for more details on this Product

Pacom's 8003 Pacom-Edge Intelligent Security Controller

Product From Pacom Systems

INDIANAPOLIS, IN – (September 15, 2014) – Pacom Systems announces the official launch of the 8003 Pacom-Edge Intelligent Security Controller. Pacom now expands its expertise and marketing leading position across a wide range of industries, through the design of a fully integrated security controller that combines the critical capabilities of an IP-based alarm panel, access control panel and multi-card reader interface into a single, cost-effective device.

Get Info Now

Securitron EcoPower

Product From Securitron Magnalock Corp.

Securitron EcoPower is a highly efficient power supply designed to work with Corbin Russwin or SARGENT electrified mortise locks with Ecoflex technology. This small, aesthetic access control power supply reduces standby power consumption to only 8.5mW (0.0085W), a 99% decrease compared to current linear and switching power supplies. Using an Ecoflex lock with EcoPower can reduce door power consumption from 10W to a phenomenal 24mW. The low power consumption means that the included EcoPower battery provides 24 or more hours of backup power. EcoPower is the most efficient, fully featured power supply available today.

Get Info Now

AMAG Technology's Symmetry SR Retrofit System

Product From AMAG Technology

Torrance, CA, September 3, 2014 – AMAG Technology announces that Casi Rusco users who migrate to the Symmetry SR Retrofit solution now have access to the powerful ecosystem of Symmetry products.  Symmetry users can take advantage of a plethora of integrations and open options that were previously not available to them, providing a total security management system solution that meets or exceeds any requirement.  

Get Info Now

infinias' Intelli-M Access NVR

Product From Infinias LLC

Indianapolis, IN (August 20, 2014) –infinias, an industry-leading manufacturer and provider of IP-based access control software and hardware, announces release of a newly integrated access control and video management system – Intelli-M Access NVR.

Get Info Now

Galaxy Control Systems’ Dual Reader Module

Product From Galaxy Control Systems

Galaxy Control Systems' Galaxy DRM, designed for use with the company’s 635 Dual Serial Interface (DSI), is engineered for use with legacy RS485 UTP cabling. It enables multiple readers to be connected in a variety of configurations without the need to run dedicated cabling from a centralized controller, which significantly reduces installation labor and cabling costs for new and existing access control installations.

Get Info Now

Linear Enterprise -- a browser-based access control system

Product From Linear LLC

Las Vegas, NV - ISC West - April 2-4, 2014 - Booth 20053 - Linear, LLC a leader in access control, health and wellness and security solutions, introduces Linear Enterprise, a browser-based, embedded network appliance and access control system available through select Linear dealers and equipped for large-scale installations. Enterprise offers remote management, low total cost of ownership (TCO), an easy path to VMS integration, and a unique license key system that makes integration and expansion easier than ever.

Get Info Now

FST21's SafeI Access Control Controller

Product From FST21

FST21, a leading technology company specializing in the field of identification and security, is pleased to announce the arrival of SafeI, a fully integrated access control controller that delivers the most advanced, secure and convenient In Motion Identification access control on the market.

Get Info Now

Avigilon's Access Control Manager 5.0

Product From Avigilon Inc.

VANCOUVER, CANADA – MARCH 12, 2014 – Avigilon Corporation, a global leader in end-to-end security solutions, today introduced Access Control Manager (ACM) 5.0 to its innovative and expanding product portfolio. The addition of ACM 5.0 marks the completion of the operational integration of RedCloud Security, Inc., acquired by Avigilon in May 2013. 

Get Info Now

Honeywell's Pro-Watch M-5 Conversion Drop-In Board Replacement

Product From Honeywell International Inc.

LOUISVILLE, Ky., Feb. 21, 2014 – Integrators have a new way to modernize their customers’ security without having to completely replace older access control systems that have been in place for many years. Honeywell today announced a drop-in board replacement for use with its Pro-Watch Security Management System that allows integrators to easily migrate third party legacy systems.

Get Info Now

NOVA.16 16-door access control panel

Product From Secura Key

Secura Key’s is proud to announce the launch of the NOVA.16 (Model SK-MRCP) multi-reader access control panel, based on the powerful ARM Cortex M3, 32-bit RISC processor. This new platform provides a major technology upgrade to

Get Info Now