Fire/Life Safety Product Archive

  • CO1224TR Carbon Monoxide (CO) Detector

    The CO1224TR Carbon Monoxide (CO) Detector with RealTest from System Sensor is a round version of the award-winning System Sensor CO1224T CO detector for ceiling or wall applications — where a round device better suits the aesthetics. Like the...

    Product • March 14th, 2011

  • Fiber Optic phone line Isolator

    Noisy phone lines, lighting on phone line issues, or to maintain the integrity of a fiber optic designed security systems that need remote monitoring. This unit is not made for DSL lines, only regular Potts lines because it will cancel the DSL...

    Product • March 9th, 2011

  • Spike Block

    Best used on Fire alarm panels, Gate/Access controls and CCTV equipment. This is a ground filter, UL listed and prevents a feed back loop or ground strikes that causes false alarms or case ground strikes that blow out the panel PC board.

    Product • March 8th, 2011

  • FA 30BH for Bells/Horns & NAC

    Heavy current on a 24V loop line for NAC and horns. Surge Suppression

    Product • March 8th, 2011

  • FA 30VB for Class B, SLC and Data loops

    Class B, (2units for Class A), Data, and SLC loops approved for FCI E-3 system, will not allow false alarms, very advanced low voltage surge suppressor.

    Product • March 8th, 2011

  • 120HWCP20CBPLC

    Very Special Surge suppression with a Brain.

    Product • March 8th, 2011

  • 120HWCP20CB

    In line series three stage two tank circtuit designed surge suppression. Used on Fire alarms, Gate/Access control

    Product • March 8th, 2011

  • Napco Commercial Platform

    Napco Commercial 24V addressable, conventional and wireless systems, for fire, burglary or access, now offer speedier setup & installation with new Quick-Start faster programming and reliable UL Commercial Grade Wireless Fire & Burglary Devices...

    Product • February 9th, 2011

  • MCT-427 Wireless Smoke and Heat Detector

    The MCT-427 offers superior fire detection sensitivity, including the ability to sense rapid temperature changes and detect smoke. Installed in areas where fires are likely to begin, such as kitchens or attics, the MCT-427 monitors temperature...

    Product • January 20th, 2011

  • IPGSM-COM fire alarm communicator

    The IPGSM-COM from Honeywell Power Products is a UL-listed primary fire alarm communicator that provides Contact ID reporting via IP or GSM cellular pathways. Using the Honeywell AlarmNet communications network, triple-path redundancy provides superior...

    Product • January 7th, 2011

  • ADPRO platform

    ADPRO by Xtralis security solutions include award-winning intrusion detection and perimeter security systems that offer superior detection in challenging outdoor applications and the industry’s lowest nuisance alarm rates. Security starts at the...

    Product • January 7th, 2011

  • XTL, XT, XR alarm panels

    DMP alarm panels allow homeowners to remotely control lawn sprinklers, exterior lighting, garage doors, heating and air conditioning. When integrated with cellular-equipped DMP XTL, XT, or XR Series Panels, the same feature that lets homeowners arm/disarm...

    Product • January 6th, 2011

  • Silent Knight Selection Tool

    The SKST (Silent Knight Selection Tool) software application designed for fire alarm dealers to easily configure a bill of materials for any IntelliKnight addressable or conventional fire alarm system Silent Knight currently offers through wholesale

    Product • December 17th, 2010

  • TG-7FS Sole Path Cellular Communicator for Commercial Fire

    The 2010 edition of NFPA 72 allows a single, UL 864 listed TG-7FS to replace all of your customers existing fire panel landlines. The TG-7FS can serve as the sole communications path for commercial fire alarm systems, transmitting alarm signals from the...

    Product • December 16th, 2010

  • Uplink 2550-CF

    Designed in accordance with UL and NFPA standards, the Uplink 2550-CF meets or exceeds fire-safety requirements for major U.S. municipalities and is California Fire Marshall approved.

    Product • October 20th, 2010