NV-8PS13-PVD 8-Channel Power Supply Passive Receiver Hub

NV-8PS13-PVD 8-Channel Power Supply Passive Receiver Hub

NV-8PS13-PVD 8-Channel Power Supply Passive Receiver Hub Product Image

Supplies camera power and video transmission at distanceSelectable 24VAC-OFF-28VAC outputs, 1 amp out/chBuilt-in transient protection Use with NVT PVDTM productsIndividually floating outputs ensure total ground-loop immunityDiagnostic LEDs show load/no load, miswires, and overload

Expand for more details on this Product

AC Video System Power Supply Line

Product From Honeywell Power Products

Northford, Conn., June 24, 2014 – Honeywell (NYSE: HON) Power today released a new line of cost-effective, UL listed AC Video system supplies that provide 24VAC of constant power to support systems of any size. Equipped with as many as 16 output circuits and made to overcome common voltage drop issues, the new AC Video Power Supplies are ideal for systems with longer wire runs and more cameras.

Get Info Now

Vi2202, 2-port 60W PoE Midspan

Product From Vigitron Inc,

Vigitron introduces the Vi2202, a 2-port 60W PoE Midspan, designed to meet the growing requirements of high power IP cameras. Its built-in power supply enables each port to provide up to aggregated 60W. For higher power applications, it can be combined with Vi1120 external power supply to provide up to 60W PoE on each port.      

Get Info Now

ET4500C PoE network switch

Product From Nitek International LLC

Nitek proudly announces the introduction of the ET4500C to the rapidly expanding family of Etherstretch IP over Coax transmission products. The ET4500C is a unique 4 port PoE network switch which integrates our Etherstretch technology allowing the IP data to transmit over coaxial cable up to 1,640 feet (500 Meters).

Get Info Now

Vi3026 26-port PoE network switch

Product From Vigitron Inc,

Vigitron is pleased to announce the release of Vi3026 the first high power managed 26-port PoE network switch designed specifically for IP camera CCTV systems. Its user interface is easy to use and offers innovative features to protect your network and keep it reliably operational.

Get Info Now

Pelco IP-Centric Video Accessories

Product From Pelco by Schneider Electric

CLOVIS, CALIF. – Sept. 18, 2013 – Schneider Electric today announced the launch of eight new families of Pelco IP video accessory products, building on its commitment to offer the widest and most complete selection of IP camera and IP video accessories in the industry. These video accessories are designed to operate in all environments and applications, and give customers the ability to specify complete, end-to-end solutions by removing all guesswork with tested, compatible, ready-to-install products.

Get Info Now

IP power supply units (PSUs)

Product From Bosch Security Systems

Bosch Security Systems, Inc. announces IP power supply units (PSUs) for the MIC Series 550 (pictured) and MIC Series 612 ruggedized pan-tilt-zoom cameras. The new PSUs feature an integrated IP video encoding system, transforming these MIC Series models into network surveillance cameras.

Get Info Now

SentryPOWER CORE from Sentry View Systems

Product From Sentry View Systems

PHILADELPHIA, PA (September 10, 2012) - Sentry View Systems Inc. ("Sentry View") announces SentryPOWER CORE™ - an all-in-one solution for green, renewable energy to power complete edge based remote surveillance systems. With hybrid, multi-source power inputs, SentryPOWER CORE™ combines the benefits of solar, wind turbine, fuel cell, grid and generator to provide clean, renewable and reliable remote power for remote surveillance and critical infrastructure applications. With multiple battery charge controller inputs, and turnkey integrated communications it provides intelligent all-in-one access to remote surveillance or other sensor data. Not just a power source, SentryPOWER CORE™ includes a web interface for fluid peripheral system access and variety of communications options including secure SATCOM, wireless, IP, cellular and fiber.

Get Info Now

HubWayH16 Passive UTP Hub

Product From Altronix Corporation

HubWayH16 Passive UTP Hub transmits video, data and external power over a single CAT-5 cable. The economical 1U rack UTP solution accommodates up to 16 analog cameras. Each camera power input accepts both 24VAC/12VDC and allows pass through power over 3 pair for fixed cameras at longer distances. Lifetime warranty included.

Get Info Now

Combo PTZ, Power & coax BNC protection for CCTV

Product From AAA-Stormin Protection Products Inc

CCTV BNC C/V + PTZ & Power...very compact, and has all the protection a CCTV camera needs for PTZ, for power and for coax protection. Easy to mount inside or outside the building. There are two models available. With a Ground, and with out a Ground.

Get Info Now

BX-V010 single outlet Power Protector

Product From AAA-Stormin Protection Products Inc

If the voltage drops, current gets too high, or the voltage gets too high, it cuts off the power to your 40 watt transformer and prevents the thermal fuse from blowing out.

Get Info Now