Channel’s Vision’s B-204 IP Camera Balun Over Coax Converter Kit

Channel’s Vision’s B-204 IP Camera Balun Over Coax Converter Kit

Channel’s Vision’s B-204 IP Camera Balun Over Coax Converter Kit Product Image

COSTA MESA, CA. – March 29, 2012 – Channel Vision is pleased to announce the release of its
B-204 IP Camera Balun Over Coax Converter Kit to its line of IP Surveillance products. This kit allows installers to update existing analog based security surveillance systems to IP based systems, while utilizing the existing coax cable infrastructure.

By being able to reuse the legacy coax cable and power cables, the B-204 creates a cost effective solution minimizing the amount of labor and materials required to retrofit an analog camera system to an IP camera system. With the B-204, video can be transmitted from an IP camera over 300 feet (91M) of RG-59/6 video-grade coax cable and can support 10mbps of bandwidth. This unit is considered a passive device with no additional power required.

“When installers use the B-204 IP Camera Balun Over Coax Converter Kit, analog camera systems can be easily retrofitted to IP camera systems without installing new wire. This typically results in a savings of 30-40% of the total system cost, saving both the installer and end user time and money” stated Darrel Hauk, President/CEO of Channel Vision.

The B-204 can connect to any standard network router or switch and supports IP cameras, including Channel Vision’s 2 megapixel HD dome (6521), bullet (6522), and flush mount (6524) IP cameras, as well as its 1.3 megapixel indoor dome (6530).

Availability & Pricing

Channel Vision’s B-204 IP Camera Balun Over Coax Converter Kit is designed specifically for the installation market and is available for purchase through Channel Vision’s distribution network of custom retailers, distributors, dealers and installers throughout the world.

Expand for more details on this Product

Feed-through patch panels

Product From Cablesys

Fullerton, California - Cablesys introduces the new 24 port, 1RMU feed-through patch panels.

 

With RJ-45 ports on both sides, the feed-through patch panels are ideal for existing data centers which require additional patching. The feed-through patch panels are less messy than traditional punch down patch panels and even perform better. If used with Cablesys high performance patch cords, they will surpass Channel or Permanent Link performance standards per ANSI/TIA-568.  Panels are easy to install by IT professionals and mounting screws are included.

Get Info Now

Patch Panel Line

Product From ComCables

comCables is pleased to announce the newest patch panel additions to their product line. comCables’ Cat 5E 110 Style 12 Port Mini Patch Panel, Cat 6 110 Style 12 Port Mini Patch Panel, 24 Port Unloaded Modular 1U Patch Panel and 48 Port Unloaded Modular 2U Patch Panel all aim to add strong value to comCables existing product line and brand. The Cat 5E 110 and Cat 6 110 Style 12 Port Mini Patch Panels are constructed of high impact, flame resistant plastic. New raised, D-style mounting brackets allow for more efficient cable routing and easier access to a terminated panel when troubleshooting. Its unique ID windows are hinged to prevent loss and for easy identification.

Get Info Now

Middle Atlantic Products' Series Protection and 2-Stage Compact Surge Devices

Product From Middle Atlantic Products

Fairfield, NJ––The new Series Protection™ and 2-Stage Compact Surge Devices from Middle Atlantic Products establish new industry standards for reduced size, rapid response time and comprehensive surge protection.

Get Info Now

Altronix's Pace Long Range Ethernet Adapters

Product From Altronix Corporation

Atlanta, GA (September 29, 2014) – Altronix, the leading manufacturer of low voltage power supplies and transmission solutions for the electronic security industry, is displaying its new line of Pace™ Long Range Ethernet Adapters here at ASIS 2014. New Pace models include receivers with one, 4, 8 and 16 ports, and full duplex 100Mpbs at distances up to 500m over CAT5e without repeaters. The one port receiver accommodates single twisted pair (UTP) cabling up to 150m.  

Get Info Now

ComNet's Reliance RLFDX Series Serial Data Link

Product From Comnet

Danbury, CT. Sept. 12, 2014, ComNet, Communication Networks of Danbury, Connecticut, a USA-based manufacturer of fiber optic transmission and networking equipment, has further expanded the Reliance line by introducing the RLFDX Series of substation-rated fiber optic RS-232, RS-422, RS-485 2/4 Wire, & TTL Logic Data Link/Repeater. The ComNet Reliance RLFDX Series of products are made in the USA and are a direct replacement for the Garrettcom/Dymec5800 series of serial data over optical fiber products.  The Reliance RLFDX products can be used wherever those products were previously used.

Get Info Now

Platinum Tools' Tele-Titan Xg 2.0 10Gig Termination Tool

Product From Platinum Tools

NEWBURY PARK, Calif., Aug. 19, 2014 - Platinum Tools, the leader in solutions for the preparation, installation, hand termination and testing of wire and cable, is proud to announce the debut of the Tele-Titan™Xg 2.0 (p/n 12516) during CEDIA Expo 2014, held in Denver from Sept. 11-13 at the Colorado Convention Center, booth #500. The next generation 10Gig termination Tool is now shipping.

Get Info Now

Platinum Tools' 500 MCM Cable Cutter

Product From Platinum Tools

CAMARILLO, Calif., July 3, 2014 - Platinum Tools, the leader in solutions for the preparation, installation, hand termination and testing of wire and cable, is proud to announce the launch of the new 500 MCM Cable Cutter (p/n 10569). The 500 MCM Cable Cutter is now shipping with an MSRP of $139.95.

Get Info Now

APX-120N5 Point-to-Point Preconfigured Wireless Outdoor Bridge

Product From Antaira Technologies (formerly Aaxeon Technologies)

Anaheim, CA – May 6, 2014 – Antaira Technologies is a leading developer and supplier of Device Networking and Industrial Communication products and is proud to introduce its first-ever long distance Point-to-Point Preconfigured Wireless Outdoor Bridge called the APX-120N5.  

Get Info Now

PowerFlor Cable Management Systems

Product From Custom Products & Services, Inc.

Inver Grove Heights, MN USA – For over twenty years, PowerFlor has been producing and installing what many of its enthusiastic users call a “revolutionary” concept in raised floor cable management systems and it is currently the only completely integrated, modular, plug-and-play system on the market.

Get Info Now

ET4500C PoE network switch

Product From Nitek International LLC

Nitek proudly announces the introduction of the ET4500C to the rapidly expanding family of Etherstretch IP over Coax transmission products. The ET4500C is a unique 4 port PoE network switch which integrates our Etherstretch technology allowing the IP data to transmit over coaxial cable up to 1,640 feet (500 Meters).

Get Info Now