SurgeGate modular rackmount surge protector

SurgeGate modular rackmount surge protector

SurgeGate modular rackmount surge protector Product Image

ITW Linx announces the global launch of its innovative SurgeGate Modular Rackmount surge protector. Providing warranty-backed protection and flexibility unmatched in the market, the mix and match 12 module technology offers a wide range of benefits over conventional, fixed wall mount surge protectors. The innovative technology features industry-leading response time and can generate significant cost, labor and space savings.

 

Through the use of solid state technology, The SurgeGate Modular Rackmount ensures enhanced safety and the fastest protection time in the industry with a response time of 1 to 5 Nanoseconds.

 

Unlike standard pre-assembled surge protectors, the SurgeGate Modular Rackmount is the only mix and match surge protector on the market that offers six types of protection: Cat5 E-LAN, Cat5 E-POE, Cat5 E-75, Cat5 E-235, T1 and Telco CO (central office) line on a single 12 module rack.

 

Users can install anywhere from one to 12 modules depending on surge protection requirements. New modules can be added in the configuration and numbers needed to meet evolving surge protection needs. The ability to use one single protector for up to 12 technologies can generate cost savings up to 40 percent. Because the single rack comes with a common grounding wire, there is no need to ground each of the individual modules, leading to up to an 80 pecent reduction in installation time requirements. The single grounding wire also helps minimize grounding errors in the installation of multiple surge protectors, further enhancing technology safety.

 

The SurgeGate Modular Rackmount is also the only warranty-backed product of its kind that is UL 497 listed and tested to TIA (Telecommunications Industry Association) standards--providing the protection against expensive downtime and equipment damage.

 

ITW Linx’s SurgeGate Modular Rackmount surge protector ensures protection of security infrastructure such as CCTV cameras, access control, voice/data protection, in a diverse range of networked buildings including:

• Campuses: schools, office parks

• Financial facilities: banks, retail stores

• Medical: hospitals, doctors offices

 

The SurgeGate Modular Rackmount surge protector is 19-inches wide and 1U high devices. Pricing is dependent upon size and quantity ordered; it is approximately MSRP: $399 – RM-12MPVD; $45.50 for modules per unit in production volumes. The technology is available in-stock from a number of leading distributors including Graybar, Anixter, Catalyst Telecom, Jenne, Teledynamics and Fontel. The technology can also be ordered directly from ITW Linx with a lead time of six to eight weeks. ITW Linx can provide expert technology integration support.

 

Expand for more details on this Product

ComNet's Reliance RLFDX Series Serial Data Link

Product From Comnet

Danbury, CT. Sept. 12, 2014, ComNet, Communication Networks of Danbury, Connecticut, a USA-based manufacturer of fiber optic transmission and networking equipment, has further expanded the Reliance line by introducing the RLFDX Series of substation-rated fiber optic RS-232, RS-422, RS-485 2/4 Wire, & TTL Logic Data Link/Repeater. The ComNet Reliance RLFDX Series of products are made in the USA and are a direct replacement for the Garrettcom/Dymec5800 series of serial data over optical fiber products.  The Reliance RLFDX products can be used wherever those products were previously used.

Get Info Now

Platinum Tools' Tele-Titan Xg 2.0 10Gig Termination Tool

Product From Platinum Tools

NEWBURY PARK, Calif., Aug. 19, 2014 - Platinum Tools, the leader in solutions for the preparation, installation, hand termination and testing of wire and cable, is proud to announce the debut of the Tele-Titan™Xg 2.0 (p/n 12516) during CEDIA Expo 2014, held in Denver from Sept. 11-13 at the Colorado Convention Center, booth #500. The next generation 10Gig termination Tool is now shipping.

Get Info Now

Platinum Tools' 9-inch Ergo Crimp Tool

Product From Platinum Tools

CAMARILLO, Calif., July 21, 2014 - Platinum Tools, the leader in solutions for the preparation, installation, hand termination and testing of wire and cable, is proud to announce the launch of the 9-Inch Ergo Crimp Tool (p/n 16500). The 9-Inch Ergo Crimp Tool is now shipping with an MSRP of $39.95.

Get Info Now

Platinum Tools' 500 MCM Cable Cutter

Product From Platinum Tools

CAMARILLO, Calif., July 3, 2014 - Platinum Tools, the leader in solutions for the preparation, installation, hand termination and testing of wire and cable, is proud to announce the launch of the new 500 MCM Cable Cutter (p/n 10569). The 500 MCM Cable Cutter is now shipping with an MSRP of $139.95.

Get Info Now

APX-120N5 Point-to-Point Preconfigured Wireless Outdoor Bridge

Product From Antaira Technologies (formerly Aaxeon Technologies)

Anaheim, CA – May 6, 2014 – Antaira Technologies is a leading developer and supplier of Device Networking and Industrial Communication products and is proud to introduce its first-ever long distance Point-to-Point Preconfigured Wireless Outdoor Bridge called the APX-120N5.  

Get Info Now

Vigitron's Vi3026 10-port PoE Switch

Product From Vigitron Inc,

Vigitron introduces the Vi3010, the 10-port version of the highly popular Vi3026 port network PoE switch with the same unique features. Its PoE power budget is 180W. All ports can provide up to 15.4W (802.3af) and 6 of the ports up to 30W (802.3at) PoE power.

Get Info Now

ComNet's Netwave NW8 Wireless Perimeter Transmission Solution

Product From Comnet

Danbury, CT. May 21, 2014, ComNet, Communication Networks of Danbury, Connecticut, a USA-based manufacturer of fiber optic, wireless and copper transmission and networking equipment, has introduced the NetWave NW8 wireless Ethernet link that is designed to support redundant ring and “Drop-and-Insert” functionality on a wireless network. The NW8 is a dual radio version of the recently introduced NW series of environmentally hardened wireless Ethernet products.

Get Info Now

PowerFlor Cable Management Systems

Product From Custom Products & Services, Inc.

Inver Grove Heights, MN USA – For over twenty years, PowerFlor has been producing and installing what many of its enthusiastic users call a “revolutionary” concept in raised floor cable management systems and it is currently the only completely integrated, modular, plug-and-play system on the market.

Get Info Now

ET4500C PoE network switch

Product From Nitek International LLC

Nitek proudly announces the introduction of the ET4500C to the rapidly expanding family of Etherstretch IP over Coax transmission products. The ET4500C is a unique 4 port PoE network switch which integrates our Etherstretch technology allowing the IP data to transmit over coaxial cable up to 1,640 feet (500 Meters).

Get Info Now

eConsole Network Management Software for ComNet Ethernet Switches

Product From Comnet

Las Vegas, NV. April 2, 2014, ComNet, Communication Networks of Danbury, Connecticut, a USA-based manufacturer of fiber optic, wireless and copper transmission and networking equipment, has introduced a new software suite designed to manage and monitor Ethernet network devices. The eConsole suite allows users to mange, be informed of critical situations, and provide immediate recovery assistance in the event of a network challenge.

Get Info Now