Tech Trends: Beyond the AI Buzz - Five Security Technologies to Watch

Five non-AI advances – from Aliro 1.0 to Wi-Fi HaLow – are giving integrators new ways to prove value to customers.

Key Highlights

  • Five developments outside AI solve problems customers already understand: credential standards, radar, long-range Wi-Fi, hybrid cloud, and device trust.
  • Aliro 1.0 sets a common standard for phone-to-reader access. Before customers buy, integrators should verify certified products and any future hardware needs.
  • Hybrid cloud works when the system’s behavior during an outage is written into the acceptance criteria. It also opens recurring revenue in system health and recovery testing.

This article originally appeared in the November 2026 issue of Security Business magazine. Don’t forget to mention Security Business magazine on LinkedIn or our other social handles if you share it.

The most valuable thing a security integrator can bring to a sales conversation is documented evidence that a technology investment solved a real problem: Choose the problem, pilot the solution, and document the result. And while the obvious first instinct would be to turn to artificial intelligence to bring this value, some of the most useful developments right now have nothing to do with AI.

Advances in credentials, wireless connectivity, sensing, system architecture, and hardware security are creating practical opportunities to solve problems customers already understand. Here are five non-AI tech developments worth watching:

1. Mobile access is moving toward a common language. Smartphone-based credentials have become familiar territory, but interoperability remains an important challenge. Customers want convenient access without navigating a confusing combination of device requirements, applications, readers, and credential platforms.

The Connectivity Standards Alliance’s February 2026 release of Aliro 1.0 is a significant development. The standard addresses communication between mobile devices and access readers, with support for NFC, Bluetooth Low Energy, and Bluetooth combined with ultra-wideband for hands-free authentication. Its alignment with major mobile wallet ecosystems creates a foundation for more consistent digital access experiences.

For integrators, the opportunity extends beyond replacing plastic badges. Credential enrollment, employee departures, visitor access, and support procedures all deserve reconsideration.

That said, the release of a standard does not establish compatibility across every installed system. Verify certified products, supported phones, reader capabilities, and credential administration requirements. Customers buying readers today should understand which future capabilities require additional hardware, licensing, or replacement.

2. Radar is expanding the perimeter protection toolbox. Radar has existed for decades, but its relevance to commercial security comes from compact hardware and integration options that make it practical for more sites.

Radar uses radio waves to determine an object’s location and movement. It can complement cameras in darkness and difficult visibility, while providing detection without collecting recognizable facial imagery. Applications include outdoor areas, vehicle approaches, and locations where visual surveillance raises privacy concerns. Manufacturers like Magos Systems are also detecting drones, adding the airspace domain to the protection environment.

Consider a large equipment yard. Cameras provide visual assessment and recorded evidence, while radar can supply location information to help direct attention toward movement in a protected area. Connecting detection to camera positioning, operator notification, or an audio warning creates an operationally useful sequence.

Additional sensing has limited value if nobody owns the response.

Successful deployment requires careful engineering. Terrain, obstructions, reflections, mounting, and detection zones all affect results. Integrators should demonstrate performance against defined site scenarios and establish who responds when an alarm occurs. Additional sensing has limited value if nobody owns the response.

3. Long-range Wi-Fi opens coverage that cable cannot reach economically. Wi-Fi HaLow, based on IEEE 802.11ah, operates below 1 GHz. Its characteristics support longer reach and improved penetration through some obstructions compared with conventional higher-frequency Wi-Fi, making it worth evaluating for outbuildings, remote gates, distributed sensors, and camera applications where pulling cable is difficult or expensive.

The business opportunity begins with making previously impractical coverage achievable. A connection that avoids trenching across an operating property can change the feasibility of an entire project.

Advertised range provides only part of the answer. Available throughput, interference, regional spectrum requirements, equipment compatibility, and endpoint power all matter. Test the actual video load and environmental conditions before committing. Wireless connectivity also leaves the separate question of how to power the device.

4. Hybrid cloud is becoming a more useful design choice. The industry’s cloud conversation increasingly involves deciding where each function belongs. Cloud-managed appliances already support combinations of local and cloud recording, centralized administration, and automated updates. Genetec’s Cloudlink and Avigilon Alta Cloud from Motorola illustrate this approach.

For customers with multiple facilities, a hybrid architecture can provide a practical path to modernization while retaining selected existing equipment. It also allows integrators to align storage and management choices with site-specific requirements.

The important work is defining behavior. During an internet outage, what continues recording? Which operators retain access? How long can local storage accommodate the interruption? What happens when connectivity returns? Those answers should become acceptance criteria.

Integrators can build recurring services around system health, storage verification, update management, and recovery testing – giving the customer measurable support and the integrator an ongoing role in keeping the system dependable.

5. Trust is becoming a hardware feature. Security devices increasingly need to demonstrate their own identity and integrity. Hardware-protected cryptographic keys, secure boot, and device certificates provide mechanisms for authenticating equipment and validating the software it runs. Supported cameras can also digitally sign video to help establish its origin and detect subsequent alteration.

For integrators, these capabilities create a stronger connection with customer IT teams. Device onboarding, certificate management, firmware policies, and evidence export become parts of the security design conversation.

They also require verification. A feature on a specification sheet delivers little value if the network never authenticates the device or the customer cannot validate exported footage. Include those workflows in commissioning and training.

These five trends share a practical lesson: meaningful innovation often improves the foundations of a security program. Easier credentials, better detection, affordable connectivity, resilient architecture, and verifiable devices address problems customers already understand.

About the Author

Paul F. Benne

Paul F. Benne

Paul F. Benne is a 37-year veteran in the protective services industry. He is President of Sentinel Consulting LLC, a security consulting and design firm in based in New York City. Connect with him via LinkedIn at www.linkedin.com/in/paulbenne or visit www.sentinelgroup.us 

Sign up for our eNewsletters
Get the latest news and updates